Cleaning and care
Water container
Empty the water container daily and fill with fresh, cold tap water just before use.
When cleaning, make sure that there is no soiling in the area around the valve. Otherwise the container will not sit correctly and this could result in water leaking from the machine.
^Clean the surface the water container sits on thoroughly, taking special care to clean the recesses properly.
Waste container
Clean the waste container daily. Coffee remains can turn mouldy.
There will probably also be water in the waste container left over from the brewing and rinsing process.
^Lift the waste container and pull it forwards to remove.
Clean the waste container with hot water and a little
^Clean inside the waste container compartment, especially at the top right and left hand sides near the small windows (sensors). It is important to keep these sensors clean, as otherwise the machine will not recognise the waste container is present or that it requires emptying.
^Push the waste container back into the machine as far as it will go. When you push the waste container into the machine, you also push a lever backwards. This tells the machine that the waste container has been put back. There will be a little resistance as you do this. This is quite normal.
43