L18, L29, L20, L28 | Toshiba MMU-AP0181MH, MMU-AP0151MH manual

Check code name			Check code name		Cause of operation

[L18]		Flow selector unit system error		An indoor unit which has been operated in
				cooling only mode is operated in heating mode
				without setup for cooling only mode.


Did set up All cooling			NO		Set up All cooling mode.
Did set up All cooling					Item code (DN)=OF
to All cooling indoor unit?					Item code (DN)=OF
to All cooling indoor unit?					Cooling only operation mode=0001
					Cooling only operation mode=0001
	YES
	YES

					Check flow selector unit.
					Check flow selector unit.

Check code name	Check code name		Cause of operation

[L29]	IPDU quantity error	1.	Incorrect model setup in service for I/F P.C.
			board
		2.	Communication error between IPDU, fan
			IPDU and I/F
		3.	IPDU, fan IPDU, I/F P.C. board error

Auxiliary code :
01: IPDU1 error	02: IPDU2 error
03: IPDU1, 2 error	04: Fan IPDU error
05: IPDU1, fan IPDU error	06: IPDU2, fan IPDU error

07: All IPDU error or disconnection of communication line between IPDU-I/F P.C. board or outdoor I/F P.C. board error

Check code name	Check code name	Cause of operation

[L20]	Duplicated central	Central control addresses are duplicated.
	control addresses

Is jumper setup of outdoor I/F P.C. board correct?		NO
(Jumpers 7, 8, 9 ON)
	YES
	YES
		YES
Is communication connector between IPDU and		YES
Is communication connector between IPDU and
I/F P.C. board connected?
	NO
	NO

Correct connection of connector.

Are not two or more	YES
central control system identical
central control system identical
network addresses connected?
NO

Correct the network address of the central control system.

Check the network adaptor on the indoor P.C. board.

Is there no disconnection of communication		YES
line between IPDU and I/F P.C. board?
	NO
	NO

Is there voltage fluctuation between		NO
4 and 5 pins of CN600 on I/F P.C. board.
4 and 5 pins of CN600 on I/F P.C. board.
(Measurement by tester: DC0 to 5V, 5 pin GND)
	YES
	YES

Replace communication line.

I/F P.C. board error

Check code name	Check code name		Cause of operation

[L28]	Quantity over of	1.	Quantity over of connected outdoor units
	connected outdoor units	2.	Connection error of communication line
			between outdoor units
		3.	Outdoor I/F P.C. board error

Is there voltage fluctuation between			NO	IPDU P.C. board error
3 and 5 pins of CN600 on I/F P.C. board.

(Measurement by tester: DC0 to 5V, 5 pin GND)
	YES	Both IPDU (No.1, No.2) and fan IPDU

		did not return the communication.

Is No. of connected		NO	Max. 3 units are allowed for flex system.
outdoor units below 3 units?			Max. 3 units are allowed for flex system.
outdoor units below 3 units?
	YES
	YES
		NO
Is communication line between
			Correct connection of communication line.

outdoor units correctly connected?
outdoor units correctly connected?
	YES

Check outdoor I/F P.C. board.

	On the fan power supply P.C. board,	NO
	1) CN503: Between 1 and 5 pins 12V	NO
	1) CN503: Between 1 and 5 pins 12V

2)CN503: Between 2 and 5 pins 7V

3)Between +5V and GND at the side of CN505: 5V

YES

Replace IPDU P.C. board with trouble.

Replace fan power supply P.C. board.

Auxiliary code	P.C. board to be replaced
01	IPDU1
02	IPDU2

03	IPDU1, 2

04	Fan IPDU

05	IPDU1, fan IPDU

06	IPDU2, fan IPDU

07	IPDU1, 2, fan IPDU, I/F

MMU-AP0181MH, MMU-AP0071MH, MMU-AP0091MH, MMU-AP0151MH, MMU-AP0121MH specifications

The Toshiba MMU-AP series, consisting of models MMU-AP0121MH, MMU-AP0151MH, MMU-AP0091MH, MMU-AP0071MH, and MMU-AP0181MH, represents a significant advancement in the realm of power management and energy efficiency for a variety of applications. These modules are designed to optimize performance while ensuring minimal energy consumption, making them suitable for both commercial and industrial uses.

One of the standout features of the MMU-AP series is its intelligent power management technology. This feature allows for adaptive energy distribution based on real-time demands. By leveraging precise control algorithms, the modules can adjust their output to match the specific requirements of connected devices, ultimately leading to reduced power loss and increased efficiency. This adaptability not only benefits end-users by lowering operational costs but also contributes to a greener environment by minimizing waste.

The versatility of the MMU-AP series is evident in its wide range of operational capabilities. These power modules are designed to work effectively in various voltage levels and load conditions. With input voltage ranges suitable for standard industrial environments, they can easily be integrated into existing systems, enhancing overall functionality without requiring extensive modifications.

Moreover, the compact design of the MMU-AP modules is another notable characteristic. Their size and light weight facilitate easier installation and integration into tight spaces, making them ideal for applications where real estate is a premium. This compact profile does not compromise performance, as these modules are engineered to deliver robust power output while maintaining thermal efficiency.

In terms of reliability, the MMU-AP series is built with high-grade components that withstand harsh operating conditions. With features such as over-voltage protection, short-circuit protection, and thermal shutdown capabilities, users can trust that their equipment would operate safely and efficiently, thereby extending the lifespan of both the power modules and the devices they serve.

Finally, Toshiba’s commitment to innovation ensures that the MMU-AP series incorporates cutting-edge technology. The series supports communication protocols that enable seamless integration with smart systems, paving the way for advanced monitoring and control functions. This levels up the user experience, providing insights into performance and diagnostics that are crucial for uptime and reliability in demanding environments.

In conclusion, the Toshiba MMU-AP series offers a blend of efficiency, adaptability, and advanced technology, making it a valuable asset for various industrial and commercial applications. Its intelligent design and robust features ensure that users can optimize energy use while maintaining high performance and reliability.

[L18]

Flow selector unit system error

[L29]

IPDU quantity error

[L20]

[L28]

connected outdoor units

MMU-AP0181MH, MMU-AP0071MH, MMU-AP0091MH, MMU-AP0151MH, MMU-AP0121MH specifications