GE JCB968 Using the oven controls, Consumer Support Troubleshooting Tips Care and Cleaning

Page 10

Operating Instructions Safety Instructions

Using the oven controls.

NOTE: Throughout this manual, features and appearance may vary from your model.

Features and appearance may vary.

On some models

Oven Control, Clock and Timer Features and Settings

BAKE Pad

OVEN LIGHT ON/OFF Pad

Touch to select the bake function.

Touch to turn the oven light on or off.

Consumer Support Troubleshooting Tips Care and Cleaning

BROIL HI/LO Pad

Touch to select the broil function.

CONVECTION BAKE Pad

Touch to select baking with the convection function.

CONVECTION ROAST Pad

Touch to select roasting with the convection function.

PROOF Pad

Touch to select a warm environment useful for rising yeast-leavened products.

START Pad

Must be touched to start any cooking or cleaning function.

Display

Shows the time of day, oven temperature, whether the oven is in the bake, broil or self-cleaning mode and the times set for the timer or automatic oven operations.

If “F– and a number or letter” flash in the display and the oven control signals, this indicates a function error code. Touch the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the oven and call for service.

 

If your oven was set for a timed oven operation

 

and a power outage occurred, the clock and all

 

programmed functions must be reset.

 

The time of day will flash in the display when there

 

has been a power outage.

 

SELF CLEAN STD/LO Pad

10

Touch to select self-cleaning function.

See the Using the self-cleaning oven section.

DELAY START Pad

Use along with COOKING TIME or

SELF CLEAN STD/LO pads to set the oven

to start and stop automatically at a time you set.

COOKING TIME Pad

Touch and then touch the number pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.

CLEAR/OFF Pad

Touch to cancel ALL oven operations except the clock and timer.

CLOCK Pad

Touch before setting the clock.

Number Pads

Use to set any function requiring numbers such as the time of day on the clock, the timer, the oven temperature, the internal food temperature, the start time and length of operation for timed baking and self-cleaning.

KITCHEN TIMER ON/OFF Pad

Touch to select the timer feature.

PROBE Pad

Touch when using the probe to cook food.

WARM Pad

Touch to keep cooked foods warm. See the How to Set the Oven for Warming section.

OVEN LOCKOUT Pad

Touch, then touch START to lock/unlock the range touch pad controls.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model # Serial # Write the model and serial numbers hereConsumer Support Troubleshooting Tips All ranges can tip and injury could resultSafety Instructions SupportRadiant Surface Units Cleaning Troubleshooting Tips ConsumerOperating Instructions Care Instructions Temperature LimiterAbout the radiant surface units Consumer SupportInstructions Operating Instructions Care and Cleaning SafetyTroubleshooting Tips Using the Bridge Burner on some models Using the surface unitsHow to Set Hot surface indicator light willInstructions Operating Using the Warming Zone on some modelsFood Type Programmed functions must be reset Using the oven controlsConsumer Support Troubleshooting Tips Care and Cleaning Has been a power outageCare and Cleaning Troubleshooting Tips Consumer SupportBefore you begin… Preheating and Pan PlacementAluminum Foil Type of FoodBroiling Guide How to Set the Oven for BroilingSafety HI BroilConsumer Support Troubleshooting Tips Care Using the timed baking and roasting featuresSafety Instructions How to Set an Immediate Start and Automatic StopInstructions Operating Instructions Care and Cleaning Using the probe. on some modelsTroubleshooting Tips Consumer Support Do not store the probe in the ovenUsing the clock, kitchen timer and control lockout TroubleshootingTo Adjust the Thermostat Adjust the oven thermostat-Do it yourselfCleaning Troubleshooting Tips Consumer Support Type of margarine will affect baking performanceUsing the convection oven. on some models Tips Care and CleaningTips Consumer Support Care and Cleaning TroubleshootingHow to Set the Oven for Convection Baking or Roasting Convection RoastTouch the Convection Bake Safety Convection Roasting Guide Care and Cleaning Operating Instructions SafetyTouch the Convection Roast pad How to Set the Oven For Proofing on some models Using the proofing and warming featuresCleaning Troubleshooting Tips Consumer Support How to Set the Oven For Warming on some modelsBefore a Clean Cycle Using the self-cleaning ovenHow to Set the Oven for Cleaning How to Delay the Start of Cleaning Care and Cleaning Troubleshooting Tips Consumer SupportAfter a Clean Cycle Consumer Support Troubleshooting Tips Special features of your oven controlCare and Cleaning Troubleshooting Tips Instructions Care and CleaningTone Volume Instructions OperatingUsing the Sabbath feature. on some models How to Set for Regular Baking/RoastingTroubleshooting Tips Consumer Support How to Exit the Sabbath FeatureTips Care Care and cleaning of the rangeConsumer Support Troubleshooting Operating InstructionsInstructions Operating Instructions Care and Cleaning Troubleshooting TipsCleaning the Oven Door Lift-Off Oven DoorBroiler Pan and Grid Oven Light ReplacementConsumer Storage Drawer RemovalOven Racks and Convection Roasting Rack Troubleshooting Tips ConsumerOven Floor Stainless Steel Surfaces on some modelsBurned-On Residue Cleaning the glass cooktopNormal Daily Use Cleaning Heavy, Burned-On ResidueTroubleshooting Tips Glass surface-potential for permanent damageInstallation Instructions Prepare to Install the Range Install the Range Operation Checklist Accessories Looking For Something More?Before you call for service… Problem Possible Causes What To DoOven will not work Oven temperatureToo hot or too cold Food does not bakeSee the Using the self-cleaning oven section Clock and timerSee the Using the clock and timer section During a clean cyclePower outage Control signals afterSee the Special features of your oven control section Or start timeOwnership Registration Box Mississauga, Ontario L4Y 4G1 Consumer Product Ownership Registration Safety Instructions Operating Instructions GE Electric Range WarrantyCare and Cleaning GE Will ProvideContact Us Consumer Support GE Appliances Website Schedule ServiceParts and Accessories Register Your Appliance

JCB905, JCB968 specifications

The GE JCB968 and JCB905 are two powerful and efficient telehandlers that have made significant impacts in the construction, agricultural, and industrial sectors. Renowned for their reliability and versatility, these machines are designed to meet the demands of various heavy-duty applications.

The JCB968 is equipped with a robust engine that provides exceptional power and torque. It boasts a lifting capacity of up to 6,000 kg, making it suitable for lifting heavy loads, including pallets, materials, and equipment. The unit features a maximum lifting height of approximately 9 meters, allowing users to reach bins and heights that are otherwise difficult. One of the standout features of the JCB968 is its four-wheel drive system, which enhances traction and stability on uneven terrains. The machine also utilizes hydrostatic transmission, enabling smooth acceleration and precise control, essential for operators working in tight spaces.

Conversely, the JCB905 is notable for its compact design, making it ideal for confined job sites where space is at a premium. With a lifting capacity of 5,000 kg and an impressive reach of around 5.5 meters, the JCB905 is perfect for handling lighter materials while still offering excellent performance. Its tight turning radius allows for exceptional maneuverability, ensuring that operators can navigate through narrow aisles and work areas with ease.

Both machines leverage advanced hydraulic systems that improve efficiency and increase productivity. The JCB968 and JCB905 come equipped with various attachment options, such as forks, buckets, and winches, allowing for a wide range of applications from material handling to construction tasks. The cab design of both models enhances operator comfort and visibility, which is critical in ensuring safety and reducing fatigue during long working hours.

In terms of technologies, both telehandlers incorporate telematics systems that provide real-time data on machine performance, location, and health diagnostics. This allows for better fleet management and ensures that maintenance is carried out proactively, minimizing downtime.

Overall, the GE JCB968 and JCB905 are exemplary models that combine power, agility, and efficiency, making them indispensable assets in any operation requiring versatile handling capabilities. Their blend of modern technology and user-centric design stands as a testament to JCB's commitment to innovation and customer satisfaction.
Top Page Image Contents