GE JCB905, JCB968 owner manual Consumer Support, Care and Cleaning Troubleshooting Tips

Page 11

www.GEAppliances.ca

Features and appearance may vary.

On some models

Oven Control, Clock and Timer Features and Settings

BAKE Pad

DELAY START Pad

Touch to select the bake function.

Use along with COOKING TIME or

BROIL HI/LO Pad

SELF CLEAN STD/LO pads to set the oven

to start and stop automatically at a time

Touch to select the broil function.

you set.

 

Safety Instructions Operating Instructions

OVEN LOCKOUT Pad

Touch, then touch START to lock/unlock the range touch pad controls.

Display

Shows the time of day, oven temperature, whether the oven is in the bake, broil or self-cleaning mode and the times set for the timer or automatic oven operations.

If “F– and a number or letter” flash in the display and the oven control signals, this indicates a function error code. Touch the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the oven and call for service.

If your oven was set for a timed oven operation and a power outage occurred, the clock and all programmed functions must be reset.

The time of day will flash in the display when there has been a power outage.

START Pad

Must be touched to start any cooking or cleaning function.

OVEN LIGHT ON/OFF Pad

Touch to turn the oven light on or off.

SELF CLEAN STD/LO Pad

Touch to select self-cleaning function. See the Using the self-cleaning oven section.

WARM Pad

Touch to keep cooked foods warm. See the How to Set the Oven for Warming section.

Number Pads

Use to set any function requiring numbers such as the time of day on the clock, the timer, the oven temperature, the internal food temperature, the start time and length of operation for timed baking and self-cleaning.

CLEAR/OFF Pad

Touch to cancel ALL oven operations except the clock and timer.

KITCHEN TIMER ON/OFF Pad

Touch to select the timer feature.

Care and Cleaning Troubleshooting Tips

COOKING TIME Pad

CLOCK Pad

Touch and then touch the number pads to

Touch before setting the clock.

set the amount of time you want your food

 

to cook. The oven will shut off when the

 

cooking time has run out.

 

11

Consumer Support

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Write the model and serial numbers here Model # Serial #All ranges can tip and injury could result Consumer Support Troubleshooting TipsSupport Safety InstructionsRadiant Surface Units Operating Instructions Care Troubleshooting Tips ConsumerCleaning Consumer Support Temperature LimiterAbout the radiant surface units InstructionsTroubleshooting Tips SafetyInstructions Operating Instructions Care and Cleaning Hot surface indicator light will Using the surface unitsHow to Set Using the Bridge Burner on some modelsFood Type Using the Warming Zone on some modelsInstructions Operating Has been a power outage Using the oven controlsConsumer Support Troubleshooting Tips Care and Cleaning Programmed functions must be resetConsumer Support Care and Cleaning Troubleshooting TipsType of Food Preheating and Pan PlacementAluminum Foil Before you begin…HI Broil How to Set the Oven for BroilingSafety Broiling GuideHow to Set an Immediate Start and Automatic Stop Using the timed baking and roasting featuresSafety Instructions Consumer Support Troubleshooting Tips CareDo not store the probe in the oven Using the probe. on some modelsTroubleshooting Tips Consumer Support Instructions Operating Instructions Care and CleaningTroubleshooting Using the clock, kitchen timer and control lockoutType of margarine will affect baking performance Adjust the oven thermostat-Do it yourselfCleaning Troubleshooting Tips Consumer Support To Adjust the ThermostatTips Care and Cleaning Using the convection oven. on some modelsConvection Roast Care and Cleaning TroubleshootingHow to Set the Oven for Convection Baking or Roasting Tips Consumer SupportTouch the Convection Bake Safety Touch the Convection Roast pad Care and Cleaning Operating Instructions SafetyConvection Roasting Guide How to Set the Oven For Warming on some models Using the proofing and warming featuresCleaning Troubleshooting Tips Consumer Support How to Set the Oven For Proofing on some modelsHow to Set the Oven for Cleaning Using the self-cleaning ovenBefore a Clean Cycle After a Clean Cycle Care and Cleaning Troubleshooting Tips Consumer SupportHow to Delay the Start of Cleaning Care and Cleaning Special features of your oven controlConsumer Support Troubleshooting Tips Instructions Operating Instructions Care and CleaningTone Volume Troubleshooting TipsHow to Set for Regular Baking/Roasting Using the Sabbath feature. on some modelsHow to Exit the Sabbath Feature Troubleshooting Tips Consumer SupportOperating Instructions Care and cleaning of the rangeConsumer Support Troubleshooting Tips CareLift-Off Oven Door Care and Cleaning Troubleshooting TipsCleaning the Oven Door Instructions Operating InstructionsStorage Drawer Removal Oven Light ReplacementConsumer Broiler Pan and GridStainless Steel Surfaces on some models Troubleshooting Tips ConsumerOven Floor Oven Racks and Convection Roasting RackHeavy, Burned-On Residue Cleaning the glass cooktopNormal Daily Use Cleaning Burned-On ResidueGlass surface-potential for permanent damage Troubleshooting TipsInstallation Instructions Prepare to Install the Range Install the Range Operation Checklist Looking For Something More? AccessoriesProblem Possible Causes What To Do Before you call for service…Food does not bake Oven temperatureToo hot or too cold Oven will not workDuring a clean cycle Clock and timerSee the Using the clock and timer section See the Using the self-cleaning oven sectionOr start time Control signals afterSee the Special features of your oven control section Power outageOwnership Registration Box Mississauga, Ontario L4Y 4G1 Consumer Product Ownership Registration GE Will Provide GE Electric Range WarrantyCare and Cleaning Safety Instructions Operating InstructionsRegister Your Appliance Consumer Support GE Appliances Website Schedule ServiceParts and Accessories Contact Us

JCB905, JCB968 specifications

The GE JCB968 and JCB905 are two powerful and efficient telehandlers that have made significant impacts in the construction, agricultural, and industrial sectors. Renowned for their reliability and versatility, these machines are designed to meet the demands of various heavy-duty applications.

The JCB968 is equipped with a robust engine that provides exceptional power and torque. It boasts a lifting capacity of up to 6,000 kg, making it suitable for lifting heavy loads, including pallets, materials, and equipment. The unit features a maximum lifting height of approximately 9 meters, allowing users to reach bins and heights that are otherwise difficult. One of the standout features of the JCB968 is its four-wheel drive system, which enhances traction and stability on uneven terrains. The machine also utilizes hydrostatic transmission, enabling smooth acceleration and precise control, essential for operators working in tight spaces.

Conversely, the JCB905 is notable for its compact design, making it ideal for confined job sites where space is at a premium. With a lifting capacity of 5,000 kg and an impressive reach of around 5.5 meters, the JCB905 is perfect for handling lighter materials while still offering excellent performance. Its tight turning radius allows for exceptional maneuverability, ensuring that operators can navigate through narrow aisles and work areas with ease.

Both machines leverage advanced hydraulic systems that improve efficiency and increase productivity. The JCB968 and JCB905 come equipped with various attachment options, such as forks, buckets, and winches, allowing for a wide range of applications from material handling to construction tasks. The cab design of both models enhances operator comfort and visibility, which is critical in ensuring safety and reducing fatigue during long working hours.

In terms of technologies, both telehandlers incorporate telematics systems that provide real-time data on machine performance, location, and health diagnostics. This allows for better fleet management and ensures that maintenance is carried out proactively, minimizing downtime.

Overall, the GE JCB968 and JCB905 are exemplary models that combine power, agility, and efficiency, making them indispensable assets in any operation requiring versatile handling capabilities. Their blend of modern technology and user-centric design stands as a testament to JCB's commitment to innovation and customer satisfaction.
Top Page Image Contents