GE JCB905, JCB968 owner manual Troubleshooting Tips Consumer, Operating Instructions Care, Cleaning

Page 5

www.GEAppliances.ca

OVEN

Stand away from the range when opening the oven door. Hot air or steam which escapes can cause burns to hands, face and/or eyes.

Safety Instructions

■Do not heat unopened food containers. Pressure could build up and the container could burst, causing an injury.

■Keep the oven vent unobstructed.

■Keep the oven free from grease buildup.

■Place the oven rack in the desired position while the oven is cool. If racks must be handled when hot, do not let pot holder contact the heating elements.

■When using cooking or roasting bags in the oven, follow the manufacturer’s directions.

■Pulling out the rack to the stop-lock is a convenience in lifting heavy foods. It is also a precaution against burns from touching hot surfaces of the door or oven walls.

■Do not use the oven to dry newspapers. If overheated, they can catch on fire.

■Do not use the oven for a storage area. Items stored in an oven can ignite.

■Do not leave paper products, cooking utensils or food in the oven when not in use.

■Do not use aluminum foil to line oven bottoms, except as suggested in this manual. Improper installation of aluminum foil may result in a risk of electric shock or fire.

Operating Instructions Care and

SELF-CLEANING OVEN

Do not use oven cleaners. No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven. Residue from oven cleaners will damage the inside of the oven when the self-clean cycle is used.

Cleaning

■CAUTION: DO NOT LEAVE FOOD OR COOKING UTENSILS, ETC. IN THE OVEN OR ON THE COOKTOP DURING SELF-CLEANING MODE OF OPERATION.

■Do not clean the door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket.

■Before self-cleaning the oven, remove the convection roasting rack, broiler pan, grid and other cookware.

■Shiny, silver-colored oven racks (on some models) should be removed from the oven before beginning the self-clean cycle.

■Gray porcelain-coated oven racks (on some models) may be cleaned in the oven during the self-clean cycle.

■Be sure to wipe up excess spillage before starting the self-cleaning operation.

■If the self-cleaning mode malfunctions, turn the oven off and disconnect the power supply. Have it serviced by a qualified technician.

■Clean only parts listed in this Owner’s Manual.

■The surface units are automatically disabled during the self-clean cycle. Make sure that all surface unit controls are turned off at all times during the self-clean cycle. Any surface unit that is set to an on position, while the self-clean cycle is operating, will automatically come on after the self-clean cycle is finished, and could result in an on, unattended surface unit. Wait until the self-clean cycle is finished to set and use the surface units.

Troubleshooting Tips Consumer

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

5

Support

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Write the model and serial numbers here Model # Serial #All ranges can tip and injury could result Consumer Support Troubleshooting TipsSupport Safety InstructionsRadiant Surface Units Operating Instructions Care Troubleshooting Tips ConsumerCleaning About the radiant surface units Temperature LimiterInstructions Consumer SupportTroubleshooting Tips SafetyInstructions Operating Instructions Care and Cleaning How to Set Using the surface unitsUsing the Bridge Burner on some models Hot surface indicator light willFood Type Using the Warming Zone on some modelsInstructions Operating Consumer Support Troubleshooting Tips Care and Cleaning Using the oven controlsProgrammed functions must be reset Has been a power outageConsumer Support Care and Cleaning Troubleshooting TipsAluminum Foil Preheating and Pan PlacementBefore you begin… Type of FoodSafety How to Set the Oven for BroilingBroiling Guide HI BroilSafety Instructions Using the timed baking and roasting featuresConsumer Support Troubleshooting Tips Care How to Set an Immediate Start and Automatic StopTroubleshooting Tips Consumer Support Using the probe. on some modelsInstructions Operating Instructions Care and Cleaning Do not store the probe in the ovenTroubleshooting Using the clock, kitchen timer and control lockoutCleaning Troubleshooting Tips Consumer Support Adjust the oven thermostat-Do it yourselfTo Adjust the Thermostat Type of margarine will affect baking performanceTips Care and Cleaning Using the convection oven. on some modelsHow to Set the Oven for Convection Baking or Roasting Care and Cleaning TroubleshootingTips Consumer Support Convection RoastTouch the Convection Bake Safety Touch the Convection Roast pad Care and Cleaning Operating Instructions SafetyConvection Roasting Guide Cleaning Troubleshooting Tips Consumer Support Using the proofing and warming featuresHow to Set the Oven For Proofing on some models How to Set the Oven For Warming on some modelsHow to Set the Oven for Cleaning Using the self-cleaning ovenBefore a Clean Cycle After a Clean Cycle Care and Cleaning Troubleshooting Tips Consumer SupportHow to Delay the Start of Cleaning Care and Cleaning Special features of your oven controlConsumer Support Troubleshooting Tips Tone Volume Instructions Care and CleaningTroubleshooting Tips Instructions OperatingHow to Set for Regular Baking/Roasting Using the Sabbath feature. on some modelsHow to Exit the Sabbath Feature Troubleshooting Tips Consumer SupportConsumer Support Troubleshooting Care and cleaning of the rangeTips Care Operating InstructionsCleaning the Oven Door Care and Cleaning Troubleshooting TipsInstructions Operating Instructions Lift-Off Oven DoorConsumer Oven Light ReplacementBroiler Pan and Grid Storage Drawer RemovalOven Floor Troubleshooting Tips ConsumerOven Racks and Convection Roasting Rack Stainless Steel Surfaces on some modelsNormal Daily Use Cleaning Cleaning the glass cooktopBurned-On Residue Heavy, Burned-On ResidueGlass surface-potential for permanent damage Troubleshooting TipsInstallation Instructions Prepare to Install the Range Install the Range Operation Checklist Looking For Something More? AccessoriesProblem Possible Causes What To Do Before you call for service…Too hot or too cold Oven temperatureOven will not work Food does not bakeSee the Using the clock and timer section Clock and timerSee the Using the self-cleaning oven section During a clean cycleSee the Special features of your oven control section Control signals afterPower outage Or start timeOwnership Registration Box Mississauga, Ontario L4Y 4G1 Consumer Product Ownership Registration Care and Cleaning GE Electric Range WarrantySafety Instructions Operating Instructions GE Will ProvideParts and Accessories Consumer Support GE Appliances Website Schedule ServiceContact Us Register Your Appliance

JCB905, JCB968 specifications

The GE JCB968 and JCB905 are two powerful and efficient telehandlers that have made significant impacts in the construction, agricultural, and industrial sectors. Renowned for their reliability and versatility, these machines are designed to meet the demands of various heavy-duty applications.

The JCB968 is equipped with a robust engine that provides exceptional power and torque. It boasts a lifting capacity of up to 6,000 kg, making it suitable for lifting heavy loads, including pallets, materials, and equipment. The unit features a maximum lifting height of approximately 9 meters, allowing users to reach bins and heights that are otherwise difficult. One of the standout features of the JCB968 is its four-wheel drive system, which enhances traction and stability on uneven terrains. The machine also utilizes hydrostatic transmission, enabling smooth acceleration and precise control, essential for operators working in tight spaces.

Conversely, the JCB905 is notable for its compact design, making it ideal for confined job sites where space is at a premium. With a lifting capacity of 5,000 kg and an impressive reach of around 5.5 meters, the JCB905 is perfect for handling lighter materials while still offering excellent performance. Its tight turning radius allows for exceptional maneuverability, ensuring that operators can navigate through narrow aisles and work areas with ease.

Both machines leverage advanced hydraulic systems that improve efficiency and increase productivity. The JCB968 and JCB905 come equipped with various attachment options, such as forks, buckets, and winches, allowing for a wide range of applications from material handling to construction tasks. The cab design of both models enhances operator comfort and visibility, which is critical in ensuring safety and reducing fatigue during long working hours.

In terms of technologies, both telehandlers incorporate telematics systems that provide real-time data on machine performance, location, and health diagnostics. This allows for better fleet management and ensures that maintenance is carried out proactively, minimizing downtime.

Overall, the GE JCB968 and JCB905 are exemplary models that combine power, agility, and efficiency, making them indispensable assets in any operation requiring versatile handling capabilities. Their blend of modern technology and user-centric design stands as a testament to JCB's commitment to innovation and customer satisfaction.
Top Page Image Contents