GE JCB905 Using the proofing and warming features, Cleaning Troubleshooting Tips Consumer Support

Using the proofing and warming features. www.GEAppliances.ca

The proofing feature maintains a warm environment useful for rising yeast-leavened products.

How to Set the Oven For Proofing (on some models)

Safety

Place the covered dough in a dish in the oven on shelf B or C.

NOTE: For best results, cover the dough with a cloth or with greased plastic wrap (the plastic may need to be anchored underneath the container so the oven fan will not blow it off).

Touch the PROOF pad and then the START pad.

The display will read PrF (proof).

The oven interior light turns on and remains on during proofing.

The proofing feature automatically provides the optimum temperature for the proofing process, and therefore does not have a temperature adjustment.

Set the KITCHEN TIMER ON/OFF for the minimum proof time.

When proofing is finished, touch the CLEAR/OFF pad.

■To avoid lowering the oven temperature and lengthening proofing time, do not open the oven door unnecessarily.

■Check bread products early to avoid over-proofing.

NOTE:

■Do not use the proofing mode for warming food or keeping food hot. The proofing oven temperature is not hot enough to hold foods at safe temperatures. Use the WARM feature to keep food warm.

■Proofing will not operate when oven is above 125°F. “HOT” will show in the display.

Instructions Operating Instructions Care

How to Set the Oven For Warming (on some models)

and

The WARM feature keeps cooked foods hot.

This feature is not designed to reheat cold food.

To use the WARM feature, touch the WARM pad and then the START pad.

To use the WARM feature after Timed Baking or Roasting, follow these steps:

Touch the mode of cooking that you want to use (BAKE, CONVECTION

BAKE MULTI, CONVECTION BAKE 1 RACK or CONVECTION ROAST).

Touch the number pads to set the oven temperature.

Touch the COOKING TIME pad.

Touch the number pads to set the desired length of cooking time.

Touch the WARM pad.

Touch the START pad.

To Crisp Stale Items

■Place food in low-sided dishes or pans.

■For best results, place the food items in a single layer. Do not stack.

■Leave them uncovered.

■Check crispness after 20–30 minutes. Add time as needed.

IMPORTANT NOTES:

■Food should be kept hot in its cooking container or transferred to a heat-safe serving dish.

■For moist foods, cover them with an oven-safe lid or aluminum foil.

■Fried or crisp foods do not need to be covered, but can become too dry if warmed for too long.

■Repeated opening of the door allows the hot air to escape and the food to cool.

■Allow extra time for the temperature inside the oven to stabilize after adding items.

■With large loads it may be necessary to cover some of the cooked food items.

■Remove serving spoons, etc., before placing containers in the oven.

■Do not use plastic containers, lids or plastic wrap.

CAUTION: Plastic containers, lids or plastic wrap will melt if placed in the oven. Melted plastic may not be removable and is not covered under your warranty.

Cleaning Troubleshooting Tips Consumer Support

23