GE JCB968, JCB905 owner manual Safety Instructions, Touch the Convection Bake

Page 20

Safety Instructions

Using the timed features for convection cooking. (on some models)

You will hear a fan while cooking with these features. The fan will stop when the door is opened, but the heat will not turn off.

NOTE: Foods that spoil easily—such as milk, eggs, fish, stuffings, poultry and pork—should not be allowed to sit for more than 1 hour before or after cooking. Room temperature promotes the growth of harmful bacteria. Be sure that the oven light is off because heat from the bulb will speed harmful bacteria growth.

How to Set an Immediate Start and Automatic Stop

Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions

The oven will turn on immediately and cook for a selected length of time. At the end of the cooking time, the oven will turn off automatically.

Make sure the clock shows the correct time of day.

Touch the CONVECTION BAKE

MULTI/1 RACK pad once for multi- rack convection baking. This mode is used for cooking food items on more than one rack (i.e., 2, 3 or more racks) at the same time in convection bake. See Multi-Rack Baking section for more information.

Touch the CONVECTION BAKE

MULTI/1 RACK pad twice for one rack convection baking. This mode is used for cooking food items on only one rack in convection bake.

Touch the CONVECTION ROAST pad for convection roasting.

Touch the number pads to set the oven temperature.

Touch the COOKING TIME pad.

NOTE: If your recipe requires preheating, you may need to add additional time to the length of the cooking time.

Touch the number pads to set the desired length of cooking time. The minimum cooking time you can set is 1 minute. The oven temperature that you set and the cooking time that you entered will be in the display.

Touch the START pad.

The oven will turn ON, and the display will show the cooking time countdown and the changing temperature starting at 100°F. (The temperature display will start to change once the oven temprature reaches 100°F.) When the oven reaches the temperature you set, 3 beeps will sound.

NOTE: If the Auto Recipe™ Conversion Feature is on, it will automatically reduce the set regular baking temperature by 25°F to the appropriate convection temperature. See Auto Recipe™ Conversion in the Special Features section.

The oven will continue to cook for the set amount of time, then turn off automatically, unless the WARM feature was set. See the How to Set the Oven for Warming section.

After the oven turns off, the end-of-cycle tone will sound.

Touch the CLEAR/OFF pad to clear the display if necessary. Remove the food from the oven. Remember, even though the oven turns off automatically, food left in the oven will continue cooking after the oven turns off.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model # Serial # Write the model and serial numbers hereConsumer Support Troubleshooting Tips All ranges can tip and injury could resultSafety Instructions SupportRadiant Surface Units Operating Instructions Care Troubleshooting Tips ConsumerCleaning Temperature Limiter About the radiant surface unitsInstructions Consumer SupportTroubleshooting Tips SafetyInstructions Operating Instructions Care and Cleaning Using the surface units How to SetUsing the Bridge Burner on some models Hot surface indicator light willFood Type Using the Warming Zone on some modelsInstructions Operating Using the oven controls Consumer Support Troubleshooting Tips Care and CleaningProgrammed functions must be reset Has been a power outageCare and Cleaning Troubleshooting Tips Consumer SupportPreheating and Pan Placement Aluminum FoilBefore you begin… Type of FoodHow to Set the Oven for Broiling SafetyBroiling Guide HI BroilUsing the timed baking and roasting features Safety InstructionsConsumer Support Troubleshooting Tips Care How to Set an Immediate Start and Automatic StopUsing the probe. on some models Troubleshooting Tips Consumer SupportInstructions Operating Instructions Care and Cleaning Do not store the probe in the ovenUsing the clock, kitchen timer and control lockout TroubleshootingAdjust the oven thermostat-Do it yourself Cleaning Troubleshooting Tips Consumer SupportTo Adjust the Thermostat Type of margarine will affect baking performanceUsing the convection oven. on some models Tips Care and CleaningCare and Cleaning Troubleshooting How to Set the Oven for Convection Baking or RoastingTips Consumer Support Convection RoastTouch the Convection Bake Safety Touch the Convection Roast pad Care and Cleaning Operating Instructions SafetyConvection Roasting Guide Using the proofing and warming features Cleaning Troubleshooting Tips Consumer SupportHow to Set the Oven For Proofing on some models How to Set the Oven For Warming on some modelsHow to Set the Oven for Cleaning Using the self-cleaning ovenBefore a Clean Cycle After a Clean Cycle Care and Cleaning Troubleshooting Tips Consumer SupportHow to Delay the Start of Cleaning Care and Cleaning Special features of your oven controlConsumer Support Troubleshooting Tips Instructions Care and Cleaning Tone VolumeTroubleshooting Tips Instructions OperatingUsing the Sabbath feature. on some models How to Set for Regular Baking/RoastingTroubleshooting Tips Consumer Support How to Exit the Sabbath FeatureCare and cleaning of the range Consumer Support TroubleshootingTips Care Operating InstructionsCare and Cleaning Troubleshooting Tips Cleaning the Oven DoorInstructions Operating Instructions Lift-Off Oven DoorOven Light Replacement ConsumerBroiler Pan and Grid Storage Drawer RemovalTroubleshooting Tips Consumer Oven FloorOven Racks and Convection Roasting Rack Stainless Steel Surfaces on some modelsCleaning the glass cooktop Normal Daily Use CleaningBurned-On Residue Heavy, Burned-On ResidueTroubleshooting Tips Glass surface-potential for permanent damageInstallation Instructions Prepare to Install the Range Install the Range Operation Checklist Accessories Looking For Something More?Before you call for service… Problem Possible Causes What To DoOven temperature Too hot or too coldOven will not work Food does not bakeClock and timer See the Using the clock and timer sectionSee the Using the self-cleaning oven section During a clean cycleControl signals after See the Special features of your oven control sectionPower outage Or start timeOwnership Registration Box Mississauga, Ontario L4Y 4G1 Consumer Product Ownership Registration GE Electric Range Warranty Care and CleaningSafety Instructions Operating Instructions GE Will ProvideConsumer Support GE Appliances Website Schedule Service Parts and AccessoriesContact Us Register Your Appliance

JCB905, JCB968 specifications

The GE JCB968 and JCB905 are two powerful and efficient telehandlers that have made significant impacts in the construction, agricultural, and industrial sectors. Renowned for their reliability and versatility, these machines are designed to meet the demands of various heavy-duty applications.

The JCB968 is equipped with a robust engine that provides exceptional power and torque. It boasts a lifting capacity of up to 6,000 kg, making it suitable for lifting heavy loads, including pallets, materials, and equipment. The unit features a maximum lifting height of approximately 9 meters, allowing users to reach bins and heights that are otherwise difficult. One of the standout features of the JCB968 is its four-wheel drive system, which enhances traction and stability on uneven terrains. The machine also utilizes hydrostatic transmission, enabling smooth acceleration and precise control, essential for operators working in tight spaces.

Conversely, the JCB905 is notable for its compact design, making it ideal for confined job sites where space is at a premium. With a lifting capacity of 5,000 kg and an impressive reach of around 5.5 meters, the JCB905 is perfect for handling lighter materials while still offering excellent performance. Its tight turning radius allows for exceptional maneuverability, ensuring that operators can navigate through narrow aisles and work areas with ease.

Both machines leverage advanced hydraulic systems that improve efficiency and increase productivity. The JCB968 and JCB905 come equipped with various attachment options, such as forks, buckets, and winches, allowing for a wide range of applications from material handling to construction tasks. The cab design of both models enhances operator comfort and visibility, which is critical in ensuring safety and reducing fatigue during long working hours.

In terms of technologies, both telehandlers incorporate telematics systems that provide real-time data on machine performance, location, and health diagnostics. This allows for better fleet management and ensures that maintenance is carried out proactively, minimizing downtime.

Overall, the GE JCB968 and JCB905 are exemplary models that combine power, agility, and efficiency, making them indispensable assets in any operation requiring versatile handling capabilities. Their blend of modern technology and user-centric design stands as a testament to JCB's commitment to innovation and customer satisfaction.
Top Page Image Contents