GE JCB905, JCB968 owner manual Safety

Page 21

www.GEAppliances.ca

How to Set a Delayed Start and Automatic Stop

Safety

The oven will turn on at the time of day you set, cook for a specific length of time and then turn off automatically.

Make sure the clock shows the correct time of day.

Touch the CONVECTION BAKE MULTI/1 RACK pad once for multi- rack convection baking. This mode is used for cooking food items on more than one rack (i.e., 2, 3 or more racks) at the same time in convection bake. See Multi-Rack Baking section for more information.

Touch the CONVECTION BAKE

MULTI/1 RACK pad twice for one rack convection baking. This mode is used for cooking food items on only one rack in convection bake.

Touch the CONVECTION ROAST pad for convection roasting.

Touch the number pads to set the oven temperature.

Touch the COOKING TIME pad.

NOTE: If your recipe requires preheating, you may need to add additional time to the length of the cooking time.

Touch the number pads to set the desired length of cooking time. The minimum cooking time you can set is 1 minute.

The oven temperature that you set and the cooking time that you entered will be in the display.

Touch the DELAY START pad.

Touch the number pads to set the time of day you want the oven to turn on and start cooking.

Touch the START pad.

NOTE: An attention tone will sound if you are using timed baking or roasting and do not touch the START pad.

NOTE: If you would like to check the times you have set, touch the DELAY START pad to check the start time you have set, or touch the COOKING TIME pad to check the length of cooking time you have set.

When the oven turns ON at the time of day you set, the display will show the cooking time countdown and the changing temperature starting at 100°F. (The temperature display will start to change once the oven temperature reaches 100°F.) When the oven reaches the temperature you set, 3 beeps will sound.

NOTE: If the Auto Recipe™ Conversion Feature is on, it will automatically reduce the set regular baking temperature by 25°F to the appropriate convection temperature. See Auto Recipe™ Conversion in the Special Features section.

The oven will continue to cook for the programmed amount of time, then shut off automatically, unless the WARM feature was set. See the How to Set the Oven for Warming section.

After the oven turns off, the end-of-cycle tone will sound.

Touch the CLEAR/OFF pad to clear the display if necessary. Remove the food from the oven. Remember, even though the oven shuts off automatically, food left in the oven will continue cooking after the oven turns off.

Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Write the model and serial numbers here Model # Serial #All ranges can tip and injury could result Consumer Support Troubleshooting TipsSupport Safety InstructionsRadiant Surface Units Troubleshooting Tips Consumer CleaningOperating Instructions Care About the radiant surface units Temperature LimiterInstructions Consumer SupportSafety Instructions Operating Instructions Care and CleaningTroubleshooting Tips How to Set Using the surface unitsUsing the Bridge Burner on some models Hot surface indicator light willUsing the Warming Zone on some models Instructions OperatingFood Type Consumer Support Troubleshooting Tips Care and Cleaning Using the oven controlsProgrammed functions must be reset Has been a power outageConsumer Support Care and Cleaning Troubleshooting TipsAluminum Foil Preheating and Pan PlacementBefore you begin… Type of FoodSafety How to Set the Oven for BroilingBroiling Guide HI BroilSafety Instructions Using the timed baking and roasting featuresConsumer Support Troubleshooting Tips Care How to Set an Immediate Start and Automatic StopTroubleshooting Tips Consumer Support Using the probe. on some modelsInstructions Operating Instructions Care and Cleaning Do not store the probe in the ovenTroubleshooting Using the clock, kitchen timer and control lockoutCleaning Troubleshooting Tips Consumer Support Adjust the oven thermostat-Do it yourselfTo Adjust the Thermostat Type of margarine will affect baking performanceTips Care and Cleaning Using the convection oven. on some modelsHow to Set the Oven for Convection Baking or Roasting Care and Cleaning TroubleshootingTips Consumer Support Convection RoastTouch the Convection Bake Safety Care and Cleaning Operating Instructions Safety Convection Roasting GuideTouch the Convection Roast pad Cleaning Troubleshooting Tips Consumer Support Using the proofing and warming featuresHow to Set the Oven For Proofing on some models How to Set the Oven For Warming on some modelsUsing the self-cleaning oven Before a Clean CycleHow to Set the Oven for Cleaning Care and Cleaning Troubleshooting Tips Consumer Support How to Delay the Start of CleaningAfter a Clean Cycle Special features of your oven control Consumer Support Troubleshooting TipsCare and Cleaning Tone Volume Instructions Care and CleaningTroubleshooting Tips Instructions OperatingHow to Set for Regular Baking/Roasting Using the Sabbath feature. on some modelsHow to Exit the Sabbath Feature Troubleshooting Tips Consumer SupportConsumer Support Troubleshooting Care and cleaning of the rangeTips Care Operating InstructionsCleaning the Oven Door Care and Cleaning Troubleshooting TipsInstructions Operating Instructions Lift-Off Oven DoorConsumer Oven Light ReplacementBroiler Pan and Grid Storage Drawer RemovalOven Floor Troubleshooting Tips ConsumerOven Racks and Convection Roasting Rack Stainless Steel Surfaces on some modelsNormal Daily Use Cleaning Cleaning the glass cooktopBurned-On Residue Heavy, Burned-On ResidueGlass surface-potential for permanent damage Troubleshooting TipsInstallation Instructions Prepare to Install the Range Install the Range Operation Checklist Looking For Something More? AccessoriesProblem Possible Causes What To Do Before you call for service…Too hot or too cold Oven temperatureOven will not work Food does not bakeSee the Using the clock and timer section Clock and timerSee the Using the self-cleaning oven section During a clean cycleSee the Special features of your oven control section Control signals afterPower outage Or start timeOwnership Registration Box Mississauga, Ontario L4Y 4G1 Consumer Product Ownership Registration Care and Cleaning GE Electric Range WarrantySafety Instructions Operating Instructions GE Will ProvideParts and Accessories Consumer Support GE Appliances Website Schedule ServiceContact Us Register Your Appliance

JCB905, JCB968 specifications

The GE JCB968 and JCB905 are two powerful and efficient telehandlers that have made significant impacts in the construction, agricultural, and industrial sectors. Renowned for their reliability and versatility, these machines are designed to meet the demands of various heavy-duty applications.

The JCB968 is equipped with a robust engine that provides exceptional power and torque. It boasts a lifting capacity of up to 6,000 kg, making it suitable for lifting heavy loads, including pallets, materials, and equipment. The unit features a maximum lifting height of approximately 9 meters, allowing users to reach bins and heights that are otherwise difficult. One of the standout features of the JCB968 is its four-wheel drive system, which enhances traction and stability on uneven terrains. The machine also utilizes hydrostatic transmission, enabling smooth acceleration and precise control, essential for operators working in tight spaces.

Conversely, the JCB905 is notable for its compact design, making it ideal for confined job sites where space is at a premium. With a lifting capacity of 5,000 kg and an impressive reach of around 5.5 meters, the JCB905 is perfect for handling lighter materials while still offering excellent performance. Its tight turning radius allows for exceptional maneuverability, ensuring that operators can navigate through narrow aisles and work areas with ease.

Both machines leverage advanced hydraulic systems that improve efficiency and increase productivity. The JCB968 and JCB905 come equipped with various attachment options, such as forks, buckets, and winches, allowing for a wide range of applications from material handling to construction tasks. The cab design of both models enhances operator comfort and visibility, which is critical in ensuring safety and reducing fatigue during long working hours.

In terms of technologies, both telehandlers incorporate telematics systems that provide real-time data on machine performance, location, and health diagnostics. This allows for better fleet management and ensures that maintenance is carried out proactively, minimizing downtime.

Overall, the GE JCB968 and JCB905 are exemplary models that combine power, agility, and efficiency, making them indispensable assets in any operation requiring versatile handling capabilities. Their blend of modern technology and user-centric design stands as a testament to JCB's commitment to innovation and customer satisfaction.
Top Page Image Contents