OPERATINGTHESELF-CLEANINGOVEN
(continued)
Howto Set Ovenfor Cleaning
QuickReminder:
1.PresstheAUTOSELFCLEANpad.
2.Press the INCREASEor DECREASEpad untilthe desiredCleanTimeappears.
If the ovenis too hot and you start to set a clean cycle,the word “OFF’ will appearin the display. Allowadditiondtime for coolingbeforeyou try to set the cycle.
1.Followthe directionsin the Beforea CleanCycle section.
2. Afterclosingthe door,pressthe AUTO QAUTOSELF SELFCLEANpad.
CLEAN
3.Pressthe INCREASEor A DECREASEpad untilthe
@desiredCleanTimeis displayed.
CleanTimeis normally3 hours.You
ecan changethe CleanTimeto anytime between2 and4 hours,dependingon
vthe amountof soil in youroven.
The
goesoff. “
4.When the LOCKlightis off, open the door. NOTE:
● Youcan find out whenthe cleancycle
c1{T:[ will be finishedby pressingthe STOP
A TIMEpad.
QThe word“door”willbe displayed,the word “LOCK”willflashandovencontrolwillsignalif you set the cleancycleandforgetto closethe ovendoor.
●A fan may automaticallyturn on and off to cool internalparts.This is normal,and the fan may continueto run after the oven is turnedoff.
ToStop a Clean Cycle
1. Press the CLEAWOFFpad. | 2. WhentheLOCKlightgoesoff andtheovenhas |
CLEAR | cooledbelowthelockingtemperature,openthe door. |
F |
|
o |
|
20