GE JTP56, JKP56, JKP18 Using the probe, How to Set the Oven For Roasting When Using the Probe

Page 14

Instructions

Using the probe.

For many foods, especially roasts and poultry, internal food temperature is the best test for doneness. The temperature probe takes the guesswork out of roasting by cooking foods to the exact doneness you want.

Operating Instructions Safety

The temperature probe has a skewer-like probe at one end and a plug at the other end that goes into the outlet in the oven.

NOTE: Double oven models have a probe in the upper oven only.

Use of probes other than the one provided with this product may result in damage to the probe.

Use the handles of the probe and plug when inserting and removing them from the meat and outlet.

■To avoid damaging your probe, do not use tongs to pull on the cable when removing it.

■To avoid breaking the probe, make sure food is completely defrosted before inserting.

Cable

Plug

Probe

Handles

■To prevent possible burns, do not unplug the probe from the outlet until the oven has cooled.

■Never leave your probe inside the oven during a self-cleaning cycle.

■Do not store the probe in the oven.

Care and Cleaning

After preparing the meat and placing it on a trivet or on the broiler pan grid, follow these directions for proper probe placement.

Lay the probe on the outside of the meat along the top or side and mark with your finger where the edge of the meat comes to on the probe. The point should rest in the center of the thickest meaty part of the roast.

Insert the probe completely into the meat. It should not touch the bone, fat or gristle.

For roasts with no bone, insert the probe into the meatiest part of the roast. For bone-in ham or lamb, insert the probe into the center of the lowest large muscle or joint.

Insert the probe into the center of dishes such as meat loaf or casseroles. When cooking fish, insert the probe from just above the gill into the meatiest area, parallel to the backbone.

Insert the probe into the meatiest part of the inner thigh from below and parallel to the leg of a whole turkey.

How to Set the Oven For Roasting When Using the Probe

Consumer Support Troubleshooting Tips

Insert the probe into the meat.

Plug the probe into the outlet in the oven. Make sure it’s pushed all the way in. Close the oven door.

Press the PROBE pad.

Press the number pads to set the desired internal food or meat temperature.

Press the BAKE pad.

Press the number pads to set the desired oven temperature.

Press the START pad.

The display will flash if the probe is inserted into the outlet and you have not set a probe temperature and pressed the START pad.

When the oven starts to heat, the word

LO will be in the display.

14

After the internal temperature of the meat reaches 100°F., the changing internal temperature will be shown in the display.

When the internal temperature of the meat reaches the number you have set, the probe and the oven turn off and the oven control signals. To stop the signal, press the CLEAR/OFF pad. Use hot pads to remove the probe from the food. Do not use tongs to pull on it—they might damage it.

To change the oven temperature during the Roast cycle, press the BAKE pad and then the number pads to set the new temperature.

■If the probe is removed from the food before the final temperature is reached, a tone will sound and the display will flash until the probe is removed from the oven.

■You can use the timer even though you cannot use timed oven operations.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Built-In Oven Write the model and serial numbers here Model # Serial #Important Safety Notice Safety Precautions Instructions Cleaning Troubleshooting Tips Consumer Support Instructions CareConsumer Support Troubleshooting Tips Care Using the oven controlsCleaning Hour Shut-Off Special features of your oven controlTips Consumer Support Control LockoutConsumer Support Cleaning OperatingInstructions How to Exit the Sabbath Feature Using the Sabbath FeatureHow to Set for Regular Baking/Roasting Safety InstructionsCare and Cleaning Using the ovenSafety Consumer Support TroubleshootingBroiling Guide How to Set the Oven for BroilingSafety Broiling GuideTo Reset the Timer Using the clock and timerTo Set the Timer To Cancel the TimerHow to Set an Immediate Start and Automatic Stop Troubleshooting Tips Consumer SupportSafety Instructions How to Set a Delayed Start and Automatic StopUsing the probe How to Set the Oven For Roasting When Using the ProbeConvection Roast Using the convection ovenConvection Bake Adapting Recipes…Tips Care and Cleaning Consumer Support TroubleshootingConvection Roasting Guide Press the Convection Roast padPress the Convection Bake pad Using the timed features for convection bakingSafety Instructions How to Set a Delayed Start and Automatic Stop Proofing feature on upper oven only Using the proofing featureHow to Set the Oven For Proofing Check bread products early to avoid over-proofingType of margarine will affect baking performance Adjust the oven thermostat-Do it yourselfTo Adjust the Thermostat How to Set the Oven for Cleaning Using the self-cleaning ovenBefore a Clean Cycle Oven must be cool in order to set the self- clean cycleHow to Delay the Start of Cleaning Care and cleaning of the ovenCleaning Troubleshooting After a Clean CycleLift-Off Oven Door on some models To clean the inside of the doorTo clean the outside of the door To remove the doorBroiler Pan & Grid Instructions OperatingRemovable Oven Floor Control PanelTo make the shelves slide more easily ProbeOven Shelves and Convection Roasting Rack To replace Oven Light Bulbs on some modelsTo remove Stainless Steel Surfaces on some models Consumer Support Troubleshooting Tips Care and CleaningOperating Instructions Safety Oven Heating ElementsCare and Cleaning Consumer SupportBefore You Call For Service… Problem Possible Causes What To DoOpen after a Clean cycle See the Using the self-cleaning oven sectionDuring clean cycle Is on when you wantA number See the Special features of your oven control sectionPower outage Or letter flashWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Will Replace GE Built-In Electric Oven WarrantySafety Instructions Operating What GE Will Not CoverConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio
Related manuals
Manual 32 pages 61.61 Kb Manual 40 pages 8.73 Kb

JTP56, JTP18, JKP18, JKP56 specifications

The GE JKP56, JKP18, JTP56, and JTP18 are innovative commercial kitchen appliances designed to meet the demands of foodservice operations. Each model is thoughtfully engineered to enhance cooking efficiency, provide exceptional cooking results, and facilitate ease of use in bustling kitchen environments.

The GE JKP56 is a versatile oven that boasts a full-width baking element, enabling uniform heat distribution and consistent baking results. One of the standout features of the JKP56 is its self-cleaning option, which simplifies maintenance and ensures that the appliance remains in optimal condition. Additionally, the JKP56 is equipped with an electronic control system, allowing users to easily adjust cooking settings with precision. Its spacious interior and adjustable racks make it suitable for large-scale food preparation, accommodating various baking needs.

In contrast, the GE JKP18 offers a compact design without compromising on functionality. This model is ideal for kitchens with limited space, yet it still provides an impressive cooking capacity. The JKP18 features a unique window and interior light, providing visibility into the cooking process without the need to open the door. Moreover, the model's durable construction promises longevity, making it a reliable choice for restaurants and cafes consistently preparing meals.

The GE JTP56 and JTP18 are part of GE's convection oven lineup and represent cutting-edge technology. The JTP56 is distinguished by its heavy-duty construction and high-performance convection system, which circulates hot air for even cooking. This feature is particularly advantageous for baking and roasting, ensuring food is cooked to perfection. The JTP56 also includes programmable cooking modes and a user-friendly touch control panel, streamlining operations for busy chefs.

Meanwhile, the JTP18 brings similar convection technology in a more compact form. This model is designed for smaller establishments but still boasts impressive performance features. The efficient airflow design enhances cooking efficiency, while the easy-to-use interface simplifies the user's experience. Both JTP models incorporate energy-efficient technologies, reducing operational costs without sacrificing performance.

In summary, the GE JKP56, JKP18, JTP56, and JTP18 are exceptional kitchen appliances that exemplify versatility, efficiency, and durability. These models are equipped with advanced technologies and user-friendly features, making them suitable for various foodservice applications. Whether a large commercial kitchen or a quaint bistro, GE's offerings provide solutions that cater to diverse culinary needs.
Top Page Image Contents