Fisher & Paykel OR30SDPWGX manual Selecting The Cooking Function, Setting The Cooking Temperature

Page 21
1.SELECTING THE COOKING FUNCTION

SELECTING °F/°C ON THE DISPLAY

1.Turn the oven selector dial to a cooking function (i.e. 2.SETTING THE COOKING TEMPERATURE ).

2.Press 3.START THE COOKING on the programmer (or use the temperature dial) to reduce the tempe- rature until you reach the minimum value (120°F/50°C).

3.Press IMPORTANT: The cooking does not start if  is not pressed.SWITCHING OFFManual background on the programmer.

4.Keep Manual background (the temperature flashes) until “°F” or “°C” is flashing; then press Manual background again to change from °F to °C or vice versa. During selection “°C” or “°F” is flashing.

After selecting °F or °C, turn the oven selector dial to the OFF position.

USING THE OVEN

(ONLY FOR THE COOKING FUNCTIONS)

The temperature set is shown on the electronic programmer display and can be va- ried, with 5°F (5°C) intervals, by means of the programmer keys or the temperature dial.

During cooking the oven temperature (°F or °C) is measured by a sensor inside the cavity and is shown on the programmer display until set temperature is reached. If set temperature is less than inside oven temperature, the display shows the set temperature.

1.SELECTING THE COOKING FUNCTION

Turn the selector dial to the cooking function required.

2.SETTING THE COOKING TEMPERATURE

The pre-set temperature appears on the programmer display.

Turn the temperature dial to the right to increase the temperature or to the left to reduce it. Alternatively press Manual background of the programmer to increase the temperature or Manual background to reduce it.

3.START THE COOKING

Press Manual backgroundManual backgroundManual background of the programmer to start the cooking.

IMPORTANT: The cooking does not start if Manual backgroundManual backgroundManual background is not pressed.

4.CHANGING THE SET TEMPERATURE DURING COOKING The temperature can be changed by using the temperature dial.

Alternatively it can be changed by using the programmer: press Manual background and then Manual background to increase the temperature or Manual background to reduce it.

During the regulation the temperature is flashing.

The minimum temperature which can be set is 120°F (50°C) while the maxi- mum temperature is: 520°F (270°C) for the broiling and ventilated broiling; 535°F (280°C) for the other cooking functions.

SWITCHING OFF

Turn the selector dial to position OFF (oven OFF). The programmer display shows the time.

1

2

3

4

1

2

3

4

4

Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundA

Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundA

 

 

 

 

 

I

I

I I I I I

 

 

 

 

 

 

 

I

 

 

 

 

 

I

 

 

 

 

 

 

 

 

 

AI

 

 

 

 

 

I

 

 

 

 

 

 

 

 

 

I

 

 

 

 

 

I

 

 

I

 

 

 

 

 

 

 

 

 

I I

I I I I I I I I I

 

I

I I I I

I

I

 

 

 

I

 

I

I I I I I

 

 

 

I

 

I

 

 

A

I

I

 

 

I

I

 

I

 

 

I

 

I

I

I I I I I I I I I

I

I

 

 

I

 

 

 

I

 

AI

 

 

 

 

 

 

I

I I I I

I

 

 

 

 

 

 

 

 

Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background A OFF

Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundA

I

I I I I I I I I I

I I

 

 

 

 

I

 

 

 

 

 

I

 

I

 

 

A I

OFF

I

 

 

I

I I I I I I I I I

I

I

 

 

 

 

 

 

 

 

 

 

6

21

Image 21 Fisher & Paykel OR30SDPWGX manual Selecting The Cooking Function, Setting The Cooking Temperature, Start The Cooking
Contents Freestanding range User guide Guide d’utilisationCuiseur indépendant US CAINSTALL ANTI-TIP DEVICE PACKED WITH COOKER Do not touch any electrical switchSEE INSTALLATION INSTRUCTIONS WHAT TO DO IF YOU SMELL GAS Do not try to light any applianceTHIS COOKER IS FOR RESIDENTIAL USE ONLY GAS/ELECTRIC COOKERfor residential use only USERS OPERATING INSTRUCTIONS IMPORTANT - PLEASE READ AND FOLLOWPage Dear Customer Installation should be made by a Iicensed electrician USER INSTRUCTIONSFOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PRO- PERLY GROUNDED GENERAL INFORMATION 1. WARNINGIMPORTANT PRECAUTIONS AND RECOMMENDATIONS GAS BURNERS 1featuresOven controls CONTROLS DESCRIPTION Gas cooking hob controlsGAS BURNERS Semi-rapid how to use the top burnersLIGHTING GAS BURNERS FITTED WITH FLAME FAILURE SAFETY DEVICE Semi-rapid burnersThe cooker becomes very hot during operation Keep children well out of reachGAS BURNERS Dual SAFETY DEVICE Dual burners Fig. 2.6a CORRECTFig. 2.6b DIAMETERS OF PANS WHICH MAY BE USED ON THE HOB BURNERSGENERAL FEATURES how to use the warming drawerUSING THE WARMING DRAWER FOR THE FIRST TIME TO USE THE WARMING DRAWERWARNING LIGHT TEMPERATURE SELECTORREVERSIBLE RACK Dial positionhow to use the self cleaning oven Oven Light - This is not a cooking function symbol steady lit on the programmer display - fig. 4.2bConvection Cooking with Ventilation Fig. 4.2aTraditional Convection Cooking With Fan Traditional Convection CookingBroiling Ventilated BroilingBefore starting the self cleaning cycle This is not a cooking function but is only used to clean the ovenTake all the accessories out of the oven drip tray and shelves Clean any traces of liquid which have overflowedSWITCHING OFF 2. SETTING THE COOKING TEMPERATURE1. SELECTING THE COOKING FUNCTION 3. START THE COOKINGVERY IMPORTANT HOW TO START THE SELF CLEANING CYCLE2. “F0E0” and “A” appear on the programmer display 1. “door” flashing appears on the programmer displayI I I I I I I I I I I I I I IWHAT TO DO WHEN THE SELF CLEANING CYCLE HAS FINISHED HOW TO STOP THE SELF CLEANING CYCLE2. “F0E0” and “A” appear during the self cleaning cycle 1. “F000” or “F001” appear during cooking or self cleaning cycle1A A 3A A A A 4ACOOKING ADVICE It is advisable to handle the oven accessories using oven glovesSTERILIZATION ROASTING5 TH STEP Do not broil without using the broiling panWRONG CORRECTDescription of the light symbols 5how to use the electronic programmerSWITCHING ON FOR THE FIRST TIME OR AFTER A BLACK-OUT SETTING THE TIMESetting switch the oven off automatically after the programmed cooking timeStarting cooking During cooking11 12 VERY IMPORTANT cleaning and maintenance6.2 . Failure to do so can cause serious problems CORRECT POSITION OF THE SEMI-RAPID BURNERSCORRECT POSITION OF THE DUAL BURNERS CLEANING THE DUAL BURNER FITTING THE SIDE RACKS REMOVING THE SIDE RACKSFITTING AND REMOVING THE SLIDING SHELF SUPPORTS Bigger guard rail OVEN SHELF INSTALLATION AND REMOVALStop notchFITTING THE WARMING DRAWER REMOVING THE WARMING DRAWERDo not remove drawer while hot Do not remove drawer during operation Be sure drawer is empty before removingREFITTING THE OVEN DOOR REMOVING THE OVEN DOORFig. 6.15a Fig. 6.15bBefore you call for service or assistance FOR YOUR SAFETYDO’S AND DO NOT’S 5900 Skylab Road Huntington Beach, CA 92647 USACUISINIÈRE À GAZ/ÉLECTRIQUE CETTE CUISINIÈRE EST RÉSERVÉE À L’USAGE RÉSIDENTIEL UNIQUEMENTCet appareil est réservé à l’usage résidentiel uniquement MODE D’EMPLOI POUR LES UTILISATEURSCONSULTEZ LES INSTRUCTIONS D’INSTALLATION INSTALLEZ LE DISPOSITIF ANTIBASCULEMENT FOURNI AVEC LA CUISINIÈREMISE EN GARDE QUE FAIRE SI VOUS DÉCELEZ UNE ODEUR DE GAZCher client L’installation doit être effectuée par un électricien qualifié MODE D’EMPLOIRENSEIGNEMENTS GÉNÉRAUX 1. AVERTISSEMENT AVERTISSEMENTCONSIGNES ET RECOMMANDATIONS IMPORTANTES 1caractéristiques SURFACE DE CUISSONRemarque Commandes du four DESCRIPTION DES COMMANDES Commandes des brûleurs supérieursBRÛLEURS À GAZ Semi-rapide comment utiliser les brûleurs supérieursPour allumer le brûleur, vous devez procéder de la façon suivante BRÛLEURS À GAZ Double Tenez les enfants bien à l’écart La cuisinière devient très chaude lorsqu’elle fonctionneDIAMÈTRES DES CASSEROLES À UTILISER INCORRECTSUR LES BRÛLEURS DE LA SURFACE DE CUISSON BRÛLEURcomment utiliser le tiroir de maintien au chaud VOYANT AVERTISSEUR SÉLECTEUR DE TEMPÉRATUREGRILLE RÉVERSIBLE Position du boutonAVERTISSEMENT La porte est chaude, utilisez la poignée comment utiliser le four autonettoyantRecommandée pour programmateur pour démarrer la cuisson la température et le symboled’affichage du programmateur et après quelques minutes, un signal so Lampe du Four - il ne s’agit pas d’une fonction de cuissonCuisson à Convection Classique Recommandé pourCuisson par Convection Classique avec Ventilateur Cuisson au GrilREMARQUES IMPORTANTES Retirez tous les accessoires du four lèchefrite et grilleAvant de démarrer le cycle d’autonettoyage Essuyez toute trace de liquide qui aurait débordé2. SÉLECTION DE LA TEMPÉRATURE DE CUISSON 1. SÉLECTION DE LA FONCTION DE CUISSON3. DÉMARRER LA CUISSON IMPORTANT La cuisson ne démarre pas si le bouton n’est pas ap- puyéTRÈS IMPORTANT COMMENT DÉMARRER L’AUTONETTOYAGE1. “door” porte clignote sur l’écran d’affichage du programmateur PROBLÈMES DE DÉMARRAGE ET DE FONCTIONNEMENT DU CYCLE D’AUTONETTOYAGEQUE FAIRE LORSQUE L’AUTONETTOYAGE EST TERMINÉ COMMENT ARRÊTER L’AUTONETTOYAGE4. Rien ne s’affiche sur l’écran 1. “F000” ou “F001” s’affiche lors de la cuisson ou de l’autonettoyageSTÉRILISATION CONSEILS DE CUISINERÔTISSAGE CUISSON SIMULTANÉE DE PLATS VARIÉSNIVEAU NIVEAU NIVEAU 2 NIVEAUCUISSON AU GRIL N’utilisez jamais la cuisson au gril sans utiliser de lèchefriteDescription des symboles lumineux comment utiliser le programmateur électroniqueSIGNAL SONORE Description des boutonsOU CUISSON SEMI-AUTOMATIQUE - Commence la cuisson immédia MINUTERIEDémarrage de la cuisson Au cours de la cuisson1 7 6 11 12 102ANNULATION D’UN PROGRAMME EXEMPLES DE PROGRAMMATION DE LA CUISSON AUTOMATIQUEAVERTISSEMENT TRÈS IMPORTANT nettoyage et entretienPOSITION CORRECTE DES BRÛLEURS DOUBLES POSITION CORRECTE DES BRÛLEURS SEMI-RAPIDESsurvenir non-respect de cette conditionNETTOYAGE DU BRULEUR DOUBLE MONTAGE DES SUPPORTS LATÉRAUX MONTAGE ET DÉMONTAGE DES ÉTAGÈRES SUPPORTS COULISSANTS TÉLESCOPIQUESREMPLACEMENT DE LA LAMPE DU FOUR fig INSTALLATION ET RETAIT DE LA GRILLE DU FOURBigger gua railRETRAIT DU TIROIR DE MAINTIEN AU CHAUD INSTALLATION DU TIROIR DE MAINTIEN AU CHAUDAVERTISSEMENT Ne retirez pas le tiroir lorsqu’il est chaud Ne retirez pas le tiroir lorsqu’il est en marcheRÉPOSE DE LA PORTE DU FOUR DÉPOSE DE LA PORTE DU FOURPOUR VOTRE SÉCURITÉ À FAIRE ET À NE PAS FAIREAvant d’appeler pour demander une réparation ou de l’assistance Sans frais 1-888-9 FNP USA 1-888-936-7872 ou écrivez àPage F&P PN - 590583 A F&P ITALY PN - 1104406-ß1 US CA07.2013 Copyright Fisher & Paykel 2013. All rights reserved
Related manuals
Manual 44 pages 56.21 Kb