iOperation
Programming the cooktop
This | section will show you how to adjust | the elements. The table contains det |
the | heat settings and appropriate cooking | times for a variety of dishes. |
Switching the | cooktop |
|
|
| ||
on | and | off |
|
|
|
|
|
|
| Connecting and disconnecting the cooktop using theON/OFFmain switch. | |||
To | switch | on | Press theON/OFF symbol. A beep will sound". Theindicator located on top of the | |||
|
|
| ON/OFF symbol will appear. |
|
|
|
To | switch | off | Press theON/OFF symbol. The" indicator will go out. | The cooktop is switched o | ||
|
|
| The residual heat warning light stays on until the elements have cooled down | |||
|
|
| completely. |
|
|
|
Indicators |
| The cooktop switches off automatically when all | the | elements have | been switch | |
|
|
| off for more than 20 seconds. The residual heat indicator remains | lit until the | ||
|
|
| elements have cooled down sufficiently/. |
|
|
|
Adjusting | the | element |
|
|
| |
|
|
| The required heat setting can be adjusted using | the | programming | zone. |
|
|
| Heat setting 1 = minimum |
|
|
|
|
|
| Heat setting 9 = maximum |
|
|
|
|
|
| Each heat setting has an intermediate step. This | is | shown5 indicatorbyhe . | |
|
|
| (e.g. 1.5). |
|
|
|
Adjusting the heat setting:
The cooktop must be switched on.
1.Press the O symbol on the desired element. The corresponding indicator _ lights up.
15