www.GEAppliances.com
Safety
Opening
Tab
Front bar
Slide-Out Spillproof Shelf (on some models)
The
To remove:
Remove all items from shelf.
Slide the shelf out until it stops.
Lift the front edge of the shelf until the tabs are above the shelf frame.
Continue pulling the shelf forward until it can be lifted out and removed.
To replace:
Place the rear of the shelf on the shelf frame just behind the front bar.
Slide the shelf back until the tabs are above the openings.
Lower the shelf so that the tabs go into the openings; then slide the shelf all the way in.
Make sure that the shelf sits flat after reinstallation and doesn’t move freely from side to side.
Make sure you push the shelves all the way in before you close the door.
Instructions Operating Instructions
Finger hold 
Snugger
Adjustable Bins on the Door
Adjustable bins can easily be carried from refrigerator to work area.
To remove: Lift bin straight up; then pull out.
To replace or relocate: Engage the bin in the molded supports of the door and push down. Bin will lock in place.
The snugger helps prevent tipping, spilling or sliding of small items stored on the door shelf. Grip the finger hold near the rear of the snugger and move it to fit your needs.
Installation
Non-Adjustable Shelves on the Door
Detachable shelves deepen and enclose fixed door shelves, providing more storage room and greater storage flexibility.
To remove: Lift the shelf straight up; then pull out.
To replace: Engage the shelf extender in the molded supports on the door and push down. It will lock in place.
Instructions Troubleshooting
Freezer Tilt-Out Bin (on some models)
Push the button as you tilt out the bin.
Button
To remove: Hold the sides of the bin and lift it straight up; then pull out.
To replace: Engage the ends of the bin in the molded supports on the door and push down. It will lock in place.
NOTE: Do not overload the bin.7