Replacing the light bulbs, Instructions Operating

Replacing the light bulbs.

www.GEAppliances.com

Setting either or both controls to 0 does not remove power to the light circuit.

Safety

Refrigerator Compartment—Upper Light

1 Unplug the refrigerator.

2 The bulbs are located at the top of the

Tabscompartment, inside the light shield. On some models, a screw at the front of the light shield will have to be removed.

3 To remove the light shield, press in on the tabs on the sides of the shield and slide forward and out.

After replacing the bulb with an appliance bulb of the same or lower wattage, replace the light shield and screws (on some models). When replacing the light shield, make sure that the tabs at the back of the shield fit into the slots at the back of the light shield housing.

Plug the refrigerator back in.

Instructions Operating

Refrigerator Compartment—Lower Light

This light is located above the top drawer.

1 Unplug the refrigerator.

2 Remove the convertible meat drawer control knob by pulling straight out.

3 Lift the light shield up and pull it out.

After replacing the bulb with an appliance bulb of the same or lower wattage, replace the shield and the knob.

Plug the refrigerator back in.

Freezer Compartment

1 Unplug the refrigerator.

2 Remove the shelf just above the light shield. (The shelf will be easier to remove if it is emptied first.) On some models, a screw at the top of the light shield will need to be removed.

3 To remove the light shield, press in on the sides, and lift up and out.

Replace the bulb with an appliance bulb of the same or lower wattage, and reinstall the light shield. When reinstalling the light shield, make sure the top tabs snap securely into place. Replace the screw (on some models).

Reinstall the shelf and plug the refrigerator back in.

Instructions Installation Instructions Troubleshooting

Dispenser

1 Unplug the refrigerator.

2 The bulb is located on the dispenser under the control panel.

Remove the light bulb by turning it counterclockwise.

Replace the bulb with a bulb of the same size and wattage.

Plug the refrigerator back in.

Tips Consumer Support

21, 200D2600P001 specifications

The GE 200D2600P001 is a high-performance digital control system designed specifically for industrial applications. This robust system offers advanced features and technologies that enhance operational efficiency and reliability for various processes, making it a preferred choice for many industries, including oil and gas, power generation, and manufacturing.

One of the main features of the GE 200D2600P001 is its modular architecture, which allows for easy scalability and customization. Users can configure the system according to their specific needs, whether they require a simple setup for smaller applications or a complex configuration for large-scale operations. This flexibility makes it suitable for a wide range of projects and processes.

Another significant characteristic of the GE 200D2600P001 is its user-friendly interface. The system comes equipped with an intuitive graphical user interface (GUI) that simplifies monitoring and control tasks. Operators can easily navigate through different function modules, visualize process data, and access real-time reports, which enhances decision-making and optimizes workflow.

In terms of technology, the GE 200D2600P001 integrates cutting-edge communication protocols. It supports various industry-standard protocols, including Modbus, Ethernet/IP, and HART, ensuring seamless integration with other systems and devices. This interoperability facilitates data exchange and enhances the overall performance of industrial processes.

Additionally, the GE 200D2600P001 features advanced diagnostic tools that help to ensure maintenance and reduce downtime. The system is equipped with built-in self-monitoring capabilities that allow it to detect anomalies and alert operators to potential issues before they escalate into significant problems. This proactive approach to maintenance leads to increased equipment availability and longevity.

Moreover, the system is designed with security in mind, incorporating multiple layers of protection against cyber threats. This commitment to cybersecurity ensures that sensitive data remains secure and operational integrity is maintained.

Overall, the GE 200D2600P001 stands out for its modularity, user-friendly interface, advanced communication capabilities, and robust diagnostic tools. These characteristics make it an exceptional choice for industries seeking to optimize their control systems and enhance productivity while ensuring safety and security. With its reliable performance and adaptability, the GE 200D2600P001 represents a valuable investment for any industrial operation.