GE 200D2600P001 No water or ice cube, Production, But Crushed ICE, Moisture forms on, Not work

Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

Before you call for service…

Problem	Possible Causes	What To Do
No water or ice cube	Supply line or shutoff	• Call a plumber.
production	valve is clogged.
	Water filter clogged.	•Replace filter cartridge or remove filter and install plug.
	Dispenser is LOCKED.	•Press and hold the LOCK CONTROL pad for 3 seconds.
CUBED ICE was selected	Last setting was	•A few cubes were left in the crusher from the previous
but CRUSHED ICE	CRUSHED ICE.	setting. This is normal.
was dispensed
(on some models)
Refrigerator has odor	Foods transmitting	•Foods with strong odors should be tightly wrapped.
	odor to refrigerator.	•Keep an open box of baking soda in the refrigerator;
		replace every three months.
	Interior needs cleaning.	• See Care and cleaning.
	Defrost water drainage	•See Care and cleaning.
	system needs cleaning.
Moisture forms on	Not unusual during	•Wipe surface dry.
outside of refrigerator	periods of high humidity.
Moisture collects inside	Too frequent or too
(in humid weather, air	long door openings.
carries moisture into
refrigerator when doors
are opened)
Interior light does	No power at outlet.	• Replace fuse or reset the breaker.
not work
	Light bulb burned out.	•See Replacing the light bulbs.
Water on kitchen floor or	Drain in the bottom of	• See Care and cleaning.
on bottom of freezer	the freezer clogged.
	Cubes jammed in chute.	•Poke ice through with a wooden spoon.
Hot air from bottom	Normal air flow cooling
of refrigerator	motor. In the refrigeration
	process, it is normal that
	heat be expelled in the
	area under the refrigerator.
	Some floor coverings
	are sensitive and will
	discolor at these normal
	and safe temperatures.

30