Care and cleaning of the refrigerator, Cleaning the Outside

www.GEAppliances.com

Ice Storage Drawer on

Dispenser Models

Rotate

To remove:

Set the icemaker power switch to the OFF position. Pull the drawer straight out and then lift past the stop position.

To replace:	Drive
When replacing the drawer, be sure to press	Mechanism

it firmly into place. If it does not go all the way back, remove it and rotate the drive mechanism 1/4 turn. Then push the drawer back again.

Care and cleaning of the refrigerator.

Safety Instructions Operating Instructions

Dispenser drip area.

Cleaning the Outside

The dispenser drip area, (on some models) beneath the grille, should be wiped dry. Water left in this area may leave deposits. Remove the deposits by adding undiluted vinegar to the well. Soak until the deposits disappear or become loose enough to rinse away.

The dispenser cradle (on some models). Before cleaning, lock the dispenser by pressing and holding the LOCK CONTROL pad for 3 seconds. Clean with warm water and baking soda solution—about a tablespoon (15 ml) of baking soda to

a quart (1 liter) of water. Rinse thoroughly and wipe dry.

The door handles and trim. Clean with a cloth dampened with soapy water. Dry with a soft cloth.

Keep the outside clean. Wipe with a clean cloth lightly dampened with kitchen appliance wax or mild liquid dish detergent. Dry and polish with a clean, soft cloth.

Do not wipe the refrigerator with a soiled dish cloth or wet towel. These may leave a residue that can erode the paint. Do not use scouring pads, powdered cleaners, bleach or cleaners containing bleach because these products can scratch and weaken the paint finish.

Installation Instructions

Cleaning the Inside

To help prevent odors, leave an open box of baking soda in the fresh food and freezer compartments.

Unplug the refrigerator before cleaning. If this is not practical, wring excess moisture out of sponge or cloth when cleaning around switches, lights or controls.

Use warm water and baking soda solution— about a tablespoon (15 ml) of baking soda to a quart (1 liter) of water. This both cleans and neutralizes odors. Rinse and wipe dry.

After cleaning the door gaskets, apply a thin layer of petroleum jelly to the door gaskets at the hinge side. This helps keep the gaskets from sticking and bending out

of shape.

Avoid cleaning cold glass shelves with hot water because the extreme temperature difference may cause them to break. Handle glass shelves carefully. Bumping tempered glass can cause

it to shatter.

Do not wash any plastic refrigerator parts in the dishwasher.

Troubleshooting Tips Consumer Support

21, 200D2600P001 specifications

The GE 200D2600P001 is a high-performance digital control system designed specifically for industrial applications. This robust system offers advanced features and technologies that enhance operational efficiency and reliability for various processes, making it a preferred choice for many industries, including oil and gas, power generation, and manufacturing.

One of the main features of the GE 200D2600P001 is its modular architecture, which allows for easy scalability and customization. Users can configure the system according to their specific needs, whether they require a simple setup for smaller applications or a complex configuration for large-scale operations. This flexibility makes it suitable for a wide range of projects and processes.

Another significant characteristic of the GE 200D2600P001 is its user-friendly interface. The system comes equipped with an intuitive graphical user interface (GUI) that simplifies monitoring and control tasks. Operators can easily navigate through different function modules, visualize process data, and access real-time reports, which enhances decision-making and optimizes workflow.

In terms of technology, the GE 200D2600P001 integrates cutting-edge communication protocols. It supports various industry-standard protocols, including Modbus, Ethernet/IP, and HART, ensuring seamless integration with other systems and devices. This interoperability facilitates data exchange and enhances the overall performance of industrial processes.

Additionally, the GE 200D2600P001 features advanced diagnostic tools that help to ensure maintenance and reduce downtime. The system is equipped with built-in self-monitoring capabilities that allow it to detect anomalies and alert operators to potential issues before they escalate into significant problems. This proactive approach to maintenance leads to increased equipment availability and longevity.

Moreover, the system is designed with security in mind, incorporating multiple layers of protection against cyber threats. This commitment to cybersecurity ensures that sensitive data remains secure and operational integrity is maintained.

Overall, the GE 200D2600P001 stands out for its modularity, user-friendly interface, advanced communication capabilities, and robust diagnostic tools. These characteristics make it an exceptional choice for industries seeking to optimize their control systems and enhance productivity while ensuring safety and security. With its reliable performance and adaptability, the GE 200D2600P001 represents a valuable investment for any industrial operation.