Smeg LSPX1253 manual Description of the controls, Front panel

Page 10

User instructions

3. Description of the controls

3.1 Front panel

All the dishwasher's controls and indicators are located on the front panel. Programming and option selection are only possible with the door closed.

1ON/OFF BUTTON

2SELECTION PROGRAM BUTTON

3PROGRAM PHASE INDICATOR LIGHTS

4START/PAUSE BUTTON

5PROGRAM STARTED/STOP INDICATOR LIGHT (*)

6PROGRAM DELAY BUTTON

7PROGRAM DELAY LIGHT

8"3/1" OPTION BUTTON

9"3/1" OPTION LIGHT

10½ LOAD WASH BUTTON (only some models)

11½ LOAD WASH LIGHT (only some models)

123-FIGURE DISPLAY (remaining time, program delay, alarms)

13NO SALT WARNING LIGHT

14NO RINSE AID WARNING LIGHT

15DOOR HANDLE

(*)flashes while the program is in progress, stops flashing and remains on at the end of the program, or if the program is interrupted (intentionally or due to a malfunction).

9

Image 10

Contents Guide for Using the Dishwasher and the Washing Programs Contents Safety instructions Safety and operating instructionsSafety instructions Aquastop Models Installation and hook-up For free-standing models onlyWater supply connection Connecting to the Water SupplyDrain Connection Electrical connection and precautions If the Appliance is Provided with a Plugless Supply CordFuse replacement When Cleaning and Maintaining the ApplianceFor Great Britain only Description of the controls Front panelSetting the Washing Program BioCorrect amount of detergent has been added to the dispenser Washing programsBefore starting a washing program make sure that ProgrammingChanging the Program Cancelling the Current ProgramSelecting Half Load Wash on some models only Press the Program Delay button 6 again the 3-FIGURE Display Delaying the ProgramAvailable in all programs except the soak program Option Button To Save on ENERGY! … and Protect the EnvironmentEND Program Starting the DishwasherRemoving the Dishes Using the water softening system Operating instructionsUser instructions Using the rinse aid and detergent dispensers Water Hardness TableAdjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent General warnings and recommendations ProductsUser instructions Lower Basket Using the basketsLoading the Lower Basket Cutlery Basket Upper BasketAdjusting the Upper Basket Loading the Upper BasketVersion B Cleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Avoid the use of acidic or abrasive detergentsCleaning the Filter Unit Fill the rinse aid dispenser Shut off the water supply tapIf the program fails to start, check that If the dishes are not being cleaned properly, check thatReconnect the water intake hose and open the tap again If water remains inside the dishwasher, check thatIf the dishes fail to dry or remain dull, check that If there are visible traces of rust inside the tankTroubleshooting Technical Data 135 145