User instructions
ADDING THE RINSE AID
The rinse aid helps the dishes dry faster and prevents the formation of scale deposits and staining; it is automatically added to the water during the final rinse cycle, from the container situated on the inner side of the door.
To add rinse aid:
ξOpen the door.
ξRotate the container cap anticlockwise by ¼ of a turn and remove it.
ξAdd the rinse aid until the container is full (approximately 140 cc). The optical level indicator on the side of the cap should be completely obscured. Refill the rinse aid when the optical level indicator becomes clear again, or when the rinse aid warning light illuminates.
ξReplace the cover and turn it in a clockwise direction.
ξUse a cloth to remove any spillage of rinse aid which might lead to the formation of excess foam.
ADJUSTING THE RINSE AID DISPENSER SETTING
The dishwasher is factory set for medium water hardness. However it possible to change the setting by turning the dispenser’s selector to the desired position: the amount of rinse aid dispensed is proportional to the selector position.
ξTo adjust the rinse aid setting, rotate the dispenser cap through a quarter turn in an anticlockwise direction and remove it.
ξThen use a screwdriver to rotate the rinse aid selector to the desired position.
ξReplace the cap, turning it clockwise.
ξThe amount of rinse aid must be increased if the washed dishes appear dull or feature circular stains.
ξIf, on the other hand, the dishes are sticky or have white streaks, it is necessary to reduce the rinse aid setting.
19