Smeg LSPX1253 Washing programs, Before starting a washing program make sure that, Programming

Page 12

User instructions

3.2 Washing programs

The dishwasher is equipped with a control panel and an 3-FIGURE DISPLAY (12), described in chapter "1. Description of the controls", from which it is possible to carry out all the power switch-on, switch-off and programming operations.

Before starting a washing program make sure that:

The water supply tap is open.

The correct amount of detergent has been added to the dispenser.

The baskets have been correctly loaded.

The spray arms are able to rotate freely and without obstruction.

The dishwasher door is securely closed.

PROGRAMMING

In this dishwasher model all the programming operations are possible only with closed door. With open door, on the 3-FIGURE DISPLAY (12) will appear the symbols --and the PILOT LIGHT PROGRAMS (3) remains out.

SELECTION PROGRAM

Keep pressing the PROGRAM SELECTION button (2) until the indicator light corresponding (3) to the desired program illuminates.

11

Image 12

Contents Guide for Using the Dishwasher and the Washing Programs Contents Safety instructions Safety and operating instructionsSafety instructions Aquastop Models Installation and hook-up For free-standing models onlyConnecting to the Water Supply Water supply connectionDrain Connection Electrical connection and precautions If the Appliance is Provided with a Plugless Supply CordWhen Cleaning and Maintaining the Appliance Fuse replacementFor Great Britain only Description of the controls Front panelSetting the Washing Program BioWashing programs Before starting a washing program make sure thatCorrect amount of detergent has been added to the dispenser ProgrammingCancelling the Current Program Changing the ProgramSelecting Half Load Wash on some models only Delaying the Program Press the Program Delay button 6 again the 3-FIGURE DisplayAvailable in all programs except the soak program Option Button To Save on ENERGY! … and Protect the EnvironmentStarting the Dishwasher END ProgramRemoving the Dishes Using the water softening system Operating instructionsUser instructions Using the rinse aid and detergent dispensers Water Hardness TableAdjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent General warnings and recommendations ProductsUser instructions Using the baskets Lower BasketLoading the Lower Basket Cutlery Basket Upper BasketAdjusting the Upper Basket Loading the Upper BasketVersion B Cleaning and maintenance Cleaning the Water Intake FilterCleaning the Spray Arms Avoid the use of acidic or abrasive detergentsCleaning the Filter Unit Fill the rinse aid dispenser Shut off the water supply tapIf the dishes are not being cleaned properly, check that Reconnect the water intake hose and open the tap againIf the program fails to start, check that If water remains inside the dishwasher, check thatIf the dishes fail to dry or remain dull, check that If there are visible traces of rust inside the tankTroubleshooting Technical Data 135 145