Smeg LSPX1253 manual Cleaning and maintenance, Avoid the use of acidic or abrasive detergents

Page 28

User instructions

5. Cleaning and maintenance

Before carrying out any work, always unplug the appliance from the electrical supply or switch off the all-pole disconnection device.

5.1 General warnings and recommendations

Avoid the use of acidic or abrasive detergents.

Clean the outer surfaces and door-lining of the dishwasher regularly using a soft cloth moistened with water or with a normal detergent suitable for painted surfaces. Clean the door gaskets with a damp sponge. Periodically (once or twice a year) it is advisable to clean the tank and gaskets, using a soft cloth and water to remove any deposits.

CLEANING THE WATER INTAKE FILTER

The water intake filter A located at the outlet of the water supply tap needs to be cleaned periodically.

After having closed the water supply tap, unscrew the end of the water intake hose, remove the filter A and clean it delicately under running water. Reassemble filter A in its seat and carefully screw the water intake hose back into position.

CLEANING THE SPRAY ARMS

The spray arms can be easily removed for periodic cleaning of the nozzles, to prevent possible clogging. Wash them under running water and carefully replace them in their seats, checking that their rotary movement is in no way impeded.

￿To remove the upper spray arm, unscrew locking ring R.

￿To remove the lower spray arm, simply lift it up, pulling by the central part.

￿To remove the orbital spray arm assembly, take hold of the longer arm and pull the orbital unit upward. Wash the arms under a jet of running water and return them carefully to their seat. After reassembly, check that the spray arms turn freely. Otherwise, check that they have been installed correctly.

ORBITAL

27

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Guide for Using the Dishwasher and the Washing Programs Contents Safety instructions Safety and operating instructionsSafety instructions Aquastop Models Installation and hook-up For free-standing models onlyWater supply connection Connecting to the Water SupplyDrain Connection Electrical connection and precautions If the Appliance is Provided with a Plugless Supply CordFuse replacement When Cleaning and Maintaining the ApplianceFor Great Britain only Description of the controls Front panelSetting the Washing Program BioWashing programs Before starting a washing program make sure thatCorrect amount of detergent has been added to the dispenser ProgrammingChanging the Program Cancelling the Current ProgramSelecting Half Load Wash on some models only Press the Program Delay button 6 again the 3-FIGURE Display Delaying the ProgramAvailable in all programs except the soak program Option Button To Save on ENERGY! … and Protect the EnvironmentEND Program Starting the DishwasherRemoving the Dishes Using the water softening system Operating instructionsUser instructions Using the rinse aid and detergent dispensers Water Hardness TableAdjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent General warnings and recommendations ProductsUser instructions Lower Basket Using the basketsLoading the Lower Basket Cutlery Basket Upper BasketAdjusting the Upper Basket Loading the Upper BasketVersion B Cleaning and maintenance Cleaning the Water Intake FilterCleaning the Spray Arms Avoid the use of acidic or abrasive detergentsCleaning the Filter Unit Fill the rinse aid dispenser Shut off the water supply tapIf the dishes are not being cleaned properly, check that Reconnect the water intake hose and open the tap againIf the program fails to start, check that If water remains inside the dishwasher, check thatIf the dishes fail to dry or remain dull, check that If there are visible traces of rust inside the tankTroubleshooting Technical Data 135 145
Top Page Image Contents