Smeg LSPX1253 manual If the dishes fail to dry or remain dull, check that

Page 31

User instructions

If the dishes fail to dry or remain dull, check that:

ξthere is rinse aid inside the special container;

ξthe rinse aid dispenser setting is correct;

ξthe detergent used is of good quality and has not lost its effectiveness (for example, through incorrect storage, with the box left open).

If the dishes show signs of streaking, staining, etc., check that:

ξthe rinse aid dispenser setting is not too high.

If there are visible traces of rust inside the tank:

ξthe tank is made of steel, and therefore any rust marks are due to external elements (fragments of rust from the water pipes, pots, cutlery, etc.). Special products are commercially available to remove such marks;

ξcheck that the amount of detergent being used is correct. Certain detergents can be more corrosive than others.

ξcheck that the cap of the salt container is securely closed, and that the water softening setting is correct.

If after following the above troubleshooting instructions the problem persists, call the nearest After-Sales Centre.

WARNING: any operations performed on the appliance by unauthorised persons are not covered by the warranty and shall be paid for by the user.

30

Image 31

Contents Guide for Using the Dishwasher and the Washing Programs Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models For free-standing models only Installation and hook-upWater supply connection Connecting to the Water SupplyDrain Connection If the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsFuse replacement When Cleaning and Maintaining the ApplianceFor Great Britain only Front panel Description of the controlsBio Setting the Washing ProgramProgramming Washing programsBefore starting a washing program make sure that Correct amount of detergent has been added to the dispenserChanging the Program Cancelling the Current ProgramSelecting Half Load Wash on some models only Press the Program Delay button 6 again the 3-FIGURE Display Delaying the ProgramAvailable in all programs except the soak program To Save on ENERGY! … and Protect the Environment Option ButtonEND Program Starting the DishwasherRemoving the Dishes Operating instructions Using the water softening systemUser instructions Water Hardness Table Using the rinse aid and detergent dispensersAdding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent Products General warnings and recommendationsUser instructions Lower Basket Using the basketsLoading the Lower Basket Upper Basket Cutlery BasketLoading the Upper Basket Adjusting the Upper BasketVersion B Avoid the use of acidic or abrasive detergents Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Spray ArmsFill the rinse aid dispenser Shut off the water supply tap Cleaning the Filter UnitIf water remains inside the dishwasher, check that If the dishes are not being cleaned properly, check thatReconnect the water intake hose and open the tap again If the program fails to start, check thatIf there are visible traces of rust inside the tank If the dishes fail to dry or remain dull, check thatTroubleshooting Technical Data 135 145