Univex 700 manual Adjust the desired options as needed, Fine-Tuning the Projector

note

The available settings vary depending on the input source selected.

The Brightness setting changes the opacity of the projector’s LCD panels. You can also change the lamp’s brightness. Select Brightness Control in the Settings menu, then choose High or Low (the default setting is High).

2.Adjust the desired options as needed:

■Color Mode

Lets you quickly adjust the color and brightness for various environments. You can save a different setting for each source. See page 43 for a description of each color mode.

■Brightness

Lightens or darkens the overall image.

■Contrast

Adjusts the difference between light and dark areas.

■Color Saturation

Adjusts the color depth of the image.

■Tint

Adjusts the balance of green to magenta in the image.

■Sharpness

Adjusts the sharpness of the image.

■Color Temp.

Sets the color temperature of the image. Select High to tint the image bluer or Low to tint it redder (default setting is Medium). (Not available if sRGB is selected as the Color Mode setting.)

■Color Adjustment

Adjusts the color values. Select Red, Green, Blue to adjust red, green, and blue hue and saturation values. (Not available if sRGB is selected as the Color Mode setting.)

■Auto Iris

Automatically adjusts the projected luminance according to the brightness of the image. (Available only when Game or Theater is selected as the Color Mode for the current input source.)

58

Fine-Tuning the Projector