Univex 700 manual Resetting the Lamp Timer, Maintaining the Projector

note

Tighten the lamp cover securely so you do not receive a lamp cover error when you turn the projector back on.

6.Gently insert the new lamp. (If it doesn’t fit easily, make sure it is facing the right way.) Then tighten its screws.

7. Replace the lamp cover, then tighten its screw.

8. Reset the lamp timer as described in the next section.

note

Do not reset the lamp timer if you have not replaced the lamp. Otherwise, you will receive incorrect lamp usage information on the Info menu; see page 77.

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer using the projector’s menu system.

1.Press the Menu button on the remote control or on the projector’s control panel. You see the main menu.

76

Maintaining the Projector