Univex 700 manual Restoring the Default Settings, Adjusting the Image, Fine-Tuning the Projector

Restoring the Default Settings

You can use the Reset option on any menu to restore the factory-default settings for the settings in that menu.

To restore all the projector settings to their factory-default values, select the Reset menu, highlight Reset All, press Enter, and select Yes to confirm.

note

When you select Reset All in the Reset menu, it does not reset the Input Signal, User’s Logo, Language, or Lamp Hours settings.

Adjusting the Image

You can use the Image menu to adjust the brightness, sharpness, color, tint, contrast, and Auto Iris settings.

1.Press the Menu button on the projector or remote control and select the Image menu. You see a screen similar to one of these:

Computer/RGB video	Component video/
	Composite video/
	S-Video

note

If you are using the HDMI port, you see the menu on the left if the current signal is digital RGB video, or the menu on the right if the signal is component video.

Fine-Tuning the Projector

57