Univex 700 manual Adjusting the Position of the Image, Adjusting the Image Shape

Adjusting the Position of the Image

If the image is too low on the screen, you can use the front adjustable foot to raise it.

1. Press the foot release lever up and lift the front of the projector.

2.Once the image is positioned where you want it, release the lever to lock the foot in position.

3.If the image is tilted or you need to fine-tune the height of the image, you can turn the projector’s adjustable rear feet.

Raising the projector may cause the image shape to distort or “keystone,” but you can correct the shape as described below.

Adjusting the Image Shape

You can maintain a rectangular image by placing the projector directly in front of the screen and keeping it level. This also produces the best picture quality. If the projector is tilted up or down (up to 30°), or placed at an angle, the shape may “keystone” and you may need to correct the image shape.

Displaying and Adjusting the Image

41