Univex 700 manual Connecting to Video Equipment

Connecting to Video Equipment

You can connect several video sources to the projector at the same time. Before starting, look at your video equipment to determine its available video output connections:

■If your video player has an HDMI connector, see “Connecting an HDMI Video Source” on page 24.

■If your video player has a component video port (three connectors labeled either Y/Cb/Cr or Y/Pb/Pr), see “Connecting a Component Video Source” on page 25.

■If your video player has a yellow RCA video output connector, see “Connecting a Composite Video Source” on page 26.

■If your video player has an S-Video connector, see “Connecting an S-Video Source” on page 27.

■If your video player has an RGB video port, see “Connecting an RGB Video Source” on page 28.

After connecting video cables, you may also want to connect an optional audio cable to play sound through the projector; see page 32.

If you connect using an HDMI cable, the video and sound are both transferred and you won’t need to connect any additional cables for audio.

Setting Up the Projector

23