note
You cannot change the aspect ratio when displaying from a computer using the USB TypeB port or from a USB device or SD card using the Slideshow source.
Resizing Video Images
You can resize your images by changing the aspect (width to height) ratio (depending on your input signal).
Press the Aspect button on the remote control repeatedly to cycle through the available options.
Aspect button
You can also select the Aspect setting from the projector’s Signal menu. See page 59 for instructions.
Select from one of these Aspect options:
■Auto (HDMI images only): Automatically sets the best aspect ratio according to the input signal.
■Normal (for images sent through the Computer (Component Video) port only): Displays images using the full projection area and maintains the aspect ratio of the image. Choose this setting to automatically resize the image and make the best use of the display area.
■16:9: Converts the aspect ratio of the image to 16:9. 4:3 ratio images are elongated horizontally to fit.
■Zoom: Displays images using the full width of the projection area and maintains the aspect ratio of the image. The image may be cut off on the top and bottom depending on its aspect ratio.
■Full: Displays images using the full width of the projection area, but does not retain the aspect ratio. 4:3 ratio images are elongated horizontally.
■Through: Displays images as is (aspect ratio and resolution are maintained). Black bands may appear or images may be cut off, depending on the resolution.
44
Displaying and Adjusting the Image
