Univex 700 Positioning the Projector, You can place the projector in a variety of viewing setups

Positioning the Projector

You can place the projector in a variety of viewing setups.

When projecting from the front, place the projector directly in front of the center of the screen, facing the screen squarely. The center of the lens should be about level with the bottom of the screen.

note

After positioning the projector, you may want to connect a Kensington MicroSaver® anti-theft device to the lock port on the projector. You can purchase this from Epson; see

page 15.

If you place the projector below screen level, you may need to tilt it up by extending the front adjustable foot (see page 41). Tilting the projector causes the image to become “keystone” shaped, but you can correct the distortion (see page 41).

You can also install the projector on the ceiling using the optional ceiling mounting hardware (see page 15). Use the projector dimensions on page 14 to assist you in installing the projector.

Setting Up the Projector

19