Starting the Projector With a Password

5.Hold down the Num button and use the numeric keypad to enter a four digit password.

Hold down

6.When you see a confirmation message, reenter the password.

7.Press the Menu button, then press Enter to exit the screen.

8.Turn off and unplug the projector.

When the password function is enabled, you see this screen when you plug in and turn on the projector:

Hold down the Num button and use the numeric keypad to enter the four digit password.

Hold down

The password screen closes and projection begins.

note

If you leave the projector plugged in, the Password screen will not appear. It appears only if you unplug and reconnect the power cord.