Univex 700 manual Disabling the Projector’s Buttons, Choosing When to Display the Image

note

You can lock these settings to prevent them from being changed without a password (see page 64).

Choosing When to Display the Image

After your image is saved, you can set it to display as the startup screen, the screen you see when there’s no signal, or the screen you see when you press the A/V Mute button (see page 46).

1.Press the Menu button, highlight the Extended menu, and press

Enter.

2.Select Display and press Enter.

3.Choose from these display options:

■Set Display Background to Logo to display your image when there is no signal.

■Set Startup Screen to On to display your image when the projector is warming up.

■Set A/V Mute to Logo to display your image when you press the A/V Mute button.

4.When you’re finished, press Menu to exit.

Disabling the Projector’s Buttons

When you enable the Control Panel Lock function, you can lock all of the projector’s buttons, or all of the buttons except the P power button. The remote control can still be used to operate the projector.

1.Press the Menu button, highlight the Settings menu, and press

Enter.

2.Select Control Panel Lock and press the Enter button.

3.Select Full Lock (to lock all projector buttons) or Partial Lock (to lock all buttons except the P power button) and press Enter.

4. Select Yes and press Enter to confirm the setting.

68

Fine-Tuning the Projector