Instructions for the user
7.6.1 Cooking with preset temperature
After selection of the function required, the oven will start the cooking procedure at the preset temperature and the symbol will come on 
. Cooking itself is preceded by a preheating stage, which allows the oven to
heat to the cooking temperature more quickly. The 
symbol flashes on DSP2 to indicate that this stage is in progress. When the preheating stage
is over, the 
symbol will remain constantly on and a buzzer will sound to indicate that the food can be placed inside the oven.
On the pyrolythic models, the special defrosting and proving functions are together
in the same symbol 
. Set the temperature to choose the function: thawing (30°C) or proving (40°C). On the multifunction models, it is not possible to vary the temperature in the defrosting and proving functions.
7.6.2 Changing the preset temperature
The temperature preset for each function can be changed to suit the user's requirements.
At any time while cooking is in progress, turn PT1 in either direction to
increase or decrease the cooking temperature by 5 degrees at a time. (PT1 can also be held in the left or right position to increase or decrease the setting more quickly.)
7.6.3 Using the minute minder
Press PT1 once (either in the
show the 
figures (constantly on) and the 
symbol (flashing). Turn PT1 to set the minutes of cooking (from 00:01 to 04:00:00). A few seconds
after the required duration is set, the 
symbol will stop flashing and stay on constantly; the countdown will start from that moment. Now select the cooking function required and wait for the buzzer to sound, indicating that the cooking time is over.
Press PT1 once to switch off the buzzer; extended cooking time can be set by turning PT1.
If the minute minder was set in
Warning: the minute minder does not stop the cooking process. It only warns the user that the preset number of minutes have passed. To switch the oven off, press PT2.
Modifying the data set
After setting the countdown, press PT1 once. The 
symbol starts flashing; turn PT1 to change the set duration. A few seconds after the last
change, the 
symbol will stop flashing, and the countdown will restart from the new value.
51