Gaggenau RB 492, RB 472 installation instructions

8.Fastening the fixing rib to the furniture door (refrigerator compartment)

Note:

The fixing ribs are pre-assembled for stainless steel doors. In this case continue with the next installation step (“C / 9. Fastening the adjusting rib to the furniture door (freezer compartment)”).

1.Hang the furniture door on the threaded rod (a).

2.Adjust the furniture door using the threaded rod (Torx screwdriver). Re-examine the dimensions of the crack continuously. To do this, use the assembly gauge (b).

3.Transfer the position of the fastening screws on the outer edge of the appliance door to the furniture door and mark.

4.Remove furniture door.

5.On both lengths of the furniture door, draw a parallel with the help of the positioning aid.

6.Lengthen the markings to the parallels using an angle of contact.

7.Apply the fixing ribs (b) and mark out the holes.

8.Pre-drill the holes.

9.Screw on the fixing ribs (b).

10. Hang the furniture door on the threaded rods.

23