Danby DKC146SLDB manual Changing The Reversible Door, Operating Instructions

Operating Instructions

CHANGING THE REVERSIBLE DOOR

This Beer Dispenser has a door that can be set to open from the left or right side. The unit is delivered to you with the door opening from the left side. To reverse the opening direction, please follow the instructions below.

CAUTION

To avoid personal injury to yourself and/or property, we ecommend that someone assist you during the door reversal process.

1

Undo the three screws in each bracket using the Phillips screwdriver.

2

Remove the screws and bracket. Place to one side.

3

Slide the Larder Fridge door down about 15cm (6’’) and off the top hinge pin and lift away from the freezer.

4

Using the flat bladed screw driver remove the pin from the top bracket. Replace it in the hinge bracket on the opposite side.

5

Remove the screw from the side of the Larder Fridge where the bracket is to be re-fitted.

6

Slide the Larder Fridge door back on to the top hinge, making sure it’s the right way up. Screw the bottom hinge into place on the new side.

7

Check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tightening the bottom hinge. Re-adjust the leveling feet.

13