Installation Instructions
ELECTRICAL CONNECTION (cont)
This Beer Dispenser requires a standard
Never unplug the Beer Dispenser by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle.
WARNING
CO2 GAS CAN BE DANGEROUS
CO2 cylinders contain
BEFORE INSTALLATION.
1.ALWAYS connect the CO2 cylinder to a regulator. Failure to do so could result in explosion with possible injury when the cylinder valve is opened.
2.NEVER connect the CO2 cylinder directly to the product container.
3.ALWAYS follow correct procedures when cylinders are changed.
4.ALWAYS secure the cylinder in an upright position.
5.NEVER drop or throw a CO2 cylinder.
6.ALWAYS keep a CO2 cylinder away from heat. Store extra cylinders in a cool place (preferably 70°F). Securely fasten with a chain in an upright position when storing.
7.ALWAYS ventilate and leave the area immediately if CO2 leakage has occurred.
8.ALWAYS check the D.O.T. test date on the cylinder neck before installation. If over five (5) years, do not use, return cylinder to gas supplier.
9.NEVER connect a product container unless there are two (2) safety’s in the pressure system:
a.One at or on the CO2 regulator
b.One at or on the product coupler or in the pressure gas line.
Beer Keg Installation Instructions
Keg Installation Sketch
SINGLE GAUGE | FAUCET ASSEMBLY |
PRESSURE |
|
REGULATOR | TOWER |
TOWER |
|
| CLEAR HOSE |
| WITH WING NUT |
| AMERICAN |
| SANKEY TAP |
| KEG |
CO2 TANK |
|
•Install the four castors with lock provided into the unit’s bottom (four screw holes
METAL
WASHERS
RED PRESSURE HOSE | Figure 2 |
Figure 1 |
7