![](/images/new-backgrounds/1084104/84104103x1.webp)
There is interior moisture build-up
Check if ... | Then ... |
| |
The air vents are blocked in the refrigerator. | Remove any objects from in front of the air vents. Refer to | ||
| “Ensuring proper air circulation” for the location of air vents. | ||
|
|
| |
The door is opened often. | To avoid humidity | ||
| out of the refrigerator at once, keep food organized so it is | ||
| easy to find, and close the door as soon as the food is | ||
| removed. (When the door is opened, humidity from the room | ||
| air enters the refrigerator. The more often the door is opened, | ||
| the faster humidity builds up, especially when the room itself | ||
| is very humid.) | ||
|
|
| |
The room is humid. | It is normal for moisture to build up inside the refrigerator | ||
| when the room air is humid. | ||
|
|
| |
The food is not packaged correctly. | Check that all food is securely wrapped. If necessary, | ||
| repackage food according to the guidelines in the “Food | ||
| Storage Guide” section. Wipe off damp food containers | ||
| before placing in the refrigerator. | ||
|
|
|
|
The controls are not set correctly for the | Refer to the “How the controls work” section. | ||
surrounding conditions. |
|
|
|
|
|
| |
A self defrost cycle was completed. | It is normal for droplets to form on the back wall after the | ||
| refrigerator |
The doors will not close completely
Check if ... | Then ... |
|
|
Food packages are blocking the door open. | Rearrange containers so that they fit more tightly and take up |
| less space. |
|
|
The ice bin is out of position. | Push the ice bin in all the way. |
|
|
The pans, shelves, bins, or baskets are out | Put all pans, shelves, bins, and baskets back into their |
of position. | correct position. |
|
|
The gaskets are dirty. | Clean gaskets according to the directions in the “Caring for |
| Your Refrigerator” section. |
|
|
The refrigerator is not level. | Level the refrigerator. Refer to the “Leveling” section. |
|
|
The doors were removed during product installation | Remove and replace the doors according to the “Removing |
and not properly replaced. | the doors” section, or call a qualified person. |
The doors are difficult to open
Check if ... | Then ... |
The gaskets are dirty or sticky.
Clean gaskets according to the directions in the “Caring for Your Refrigerator” section.
52