Whirlpool 2199011 manual Reversing the Door Swing, Top Hinge, To remove doors from hinges

Page 8

Reversing the Door Swing

TOOLS NEEDED:

⁵⁄₁₆-inch hex-head socket wrench, No. 2 Phillips screwdriver, flat-head screwdriver, ¹⁄₂-inch open-end wrench, flat 2-inch putty knife.

⁵⁄₁₆ inch Hex Head Hinge Screw

Door Stop Screw

Sealing Screw (use on top of doors)

SUGGESTION: Reversing the door swing should be performed by a qualified person.

IMPORTANT: Before you begin, turn the refrigerator OFF and unplug it. Move food from the refrigerator, freezer and both doors to another refrigerator or cooler. On some models, you will need to remove the adjustable door bins.

To remove doors from hinges:

1.Open the refrigerator door and remove the base grille from the bottom front of the refrigerator. (See “Base Grille” section.)

2.Close the refrigerator door and keep both doors closed until you are ready to lift them free from the cabinet.

NOTE: Do not depend on the door magnets to hold the doors in place while you are working. Provide additional support for the doors while the hinges are being moved.

3.Remove the screws and components for the top hinge as shown.

4.Lift the freezer door free from the cabinet.

5.Remove the freezer door stop from the bottom of the freezer door as shown in the Center Hinge illustration. Replace the door stop on the opposite side of the freezer door.

NOTE: Be sure to place the door stop in the correct position, using the hole nearest the front of the door.

6.Remove the screws and components for the center hinge as shown.

7.Lift the refrigerator door free from the cabinet.

8.Remove the refrigerator door stop from the bottom of the refrigerator door as shown in the Bottom Hinge illustration. Replace the refrigerator door stop on the opposite side of the refrigerator door.

NOTE: Be sure to place the door stop in the correct position, using the hole nearest the front of the door.

9.Remove the screws and components for the bottom hinge as shown.

NOTE: If you are reversing the door swing, you should move the handles while the doors are off of the refrigerator. Follow the instructions in the “Reversing the Door Handles” section before replacing the doors.

To replace doors on hinges:

1.Using a flat putty knife, remove the hole plugs from the top of the refrigerator cabinet that cover the screw holes on the opposite side of the refrigerator.

2.Replace the components and screws for the bottom hinge. Tighten screws with a wrench.

3.Replace the refrigerator door.

NOTE: Do not depend on the door magnets to hold the doors in place while you are working. Provide additional support for the doors while the hinges are being moved.

4.Replace the components and screws for the center hinge as shown. Do not tighten completely.

5.Remove the top hinge hole plug from the top of the freezer door and replace it on the other side.

6.Replace the freezer door.

7.Replace the components and screws for the top hinge as shown. Do not tighten completely.

8.Line up doors so they are centered between the sides of the cabinet and parallel with each other. Adjust the center and top hinges if necessary. Tighten all screws.

NOTE: If the doors are not closing on their own, see the “Door Closing and Alignment” section.

9.Be sure to fill all openings with either the proper screws or hole plugs. Moisture will enter any unfilled opening.

10.Replace the door bins and base grille. (See the “Base Grille” section.)

11.Plug in the refrigerator and reset the controls. (See “Setting the Controls” section.) When the refrigerator cools down, return the food to the refrigerator.

Top Hinge

1.Top Hinge Cover

2.Hex Head Hinge Screws

3.Top Hinge

4.Sealing Screws

8

Image 8
Contents 2199011 Use & Care GuideGuide d’utilisation Et d’entretien Table DES Matières Before you throw away your old refrigerator or freezer Refrigerator SafetyYour safety and the safety of others is very important Not shown in the illustration above/optional on some models Parts and FeaturesOther parts and features Installing Your Refrigerator Unpacking Your RefrigeratorSpace Requirements Removing Packaging MaterialsConnecting the Refrigerator To a Water Source Electrical RequirementsRecommended Grounding Method Read all directions carefully before you beginConnecting to refrigerator Reversing the Door Swing Top HingeTo remove doors from hinges To replace doors on hingesTo reinstall freezer handle To reinstall refrigerator handleReversing the Door Handles Center HingeBase Grille Door Closing and AlignmentDoor Closing Door AlignmentEnsuring Proper Air Circulation Using Your RefrigeratorUnderstanding Sounds You May Hear Setting the Control Adjusting Control SettingsFood Storage Guide Storing Fresh FoodStoring Frozen Food Refrigerator Features Refrigerator ShelvesMeat Drawer and Cover Crisper and Crisper CoverDoor Rails Ice Maker OperationSnap-on Door Rails Drop-in Door RailsFreezer Shelf Cleaning Your RefrigeratorCaring for Your Refrigerator Power Interruptions Changing the Light BulbsVacation and Moving Care VacationsTroubleshooting MovingYour refrigerator will not operate Lights do not workMotor seems to run too much Refrigerator seems to make too much noiseIce maker is not producing ice Ice maker is producing too little iceTemperature is too warm Divider between the two compartments is warmThere is interior moisture build-up Doors are difficult to openCanada Assistance Or ServiceU.S.A Avant de jeter votre vieux réfrigérateur ou congélateur Sécurité DU RéfrigérateurVotre sécurité et celle des autres est très importante Pièces ET Caractéristiques Non illustrées ci-dessus/facultatives sur certains modèlesEnlèvement des matériaux d’emballage Installation DU RéfrigérateurEspacement requis Outils requis Méthode recommandée de mise à la terreSpécifications électriques Raccordement au réfrigérateur Arrivée d’eau froideRaccordement à une canalisation d’eau Pour enlever les portes des charnières Pour réinstaller les portes sur les charnièresInversion du sens ’ouverture des portes Pour réinstaller la poignée du congélateur Pour réinstaller la poignée du réfrigérateurInversion des poignées de porte Charnière supérieureGrille de la base Fermeture et alignement Des portesPour enlever la grille de la base Pour remplacer la grilleUtilisation DU Réfrigérateur Pouvez entendrePour s’assurer d’une circulation ’air appropriée Alignement des portesRéglage des commandes CommandeAjustement des réglages de Au numéro plusRecommandations pour l’emballage Guide d’entreposage Des alimentsConservation des aliments frais Conservation des aliments congelésTablettes du réfrigérateur Bac à viande et couvercleBac à légumes et couvercle Tringles dans la porte Utilisation de la machine GlaçonsTringles enclenchables dans la porte Tringles déposées dans la porteClayette du congélateur Nettoyage du réfrigérateurPannes de courant ’éclairageAutres conseils de nettoyage indiqués ci-dessous Pour remplacer l’ampoule du réfrigérateurDéménagement Lors d’un déménagementVacances Dépannage Les ampoules n’éclairent pasLe plat de dégivrage contient de l’eau Le moteur semble fonctionner excessivementLa machine à glaçons ne produit pas de glaçons La machine à glaçons produit trop peu de glaçonsMauvais goût ou odeur des glaçons La cloison entre les deux sections est tièdeLes portes ne se ferment pas complètement Il existe une accumulation d’humidité à l’intérieurLes portes sont difficiles à ouvrir Assistance OU Service Pour service au CanadaAu Canada Si vous avez besoin de pièces de rechange…For warranty information in Canada Installation date for in-warranty serviceWhirlpool Corporation will not pay for Pour reseignements au sujet de la garantie au Canada