Frigidaire 318201616 Important Notes to the Installer, Important Note to the Consumer

Page 4

30" ELECTRIC SLIDE-IN RANGE INSTALLATION INSTRUCTIONS

Important Notes to the Installer

1.Read all instructions contained in these installation instructions before installing range.

2.Remove all packing material from the oven compartments before connecting the electrical supply to the range.

3.Observe all governing codes and ordinances.

4.Be sure to leave these instructions with the consumer.

Important Note to the Consumer

Keep these instructions with your Owner's Guide for the local electrical inspector's use and future reference.

IMPORTANT SAFETY INSTRUCTIONS

Cold temperatures can damage the electronic control. When using the appliance for the first time, or when the appliance has not been used for an extended period of time, be certain the unit has been in temperatures above 32°F (0°C) for at least 3 hours before turning on the power to the appliance.

•Be sure your range is installed and grounded properly by a qualified installer or service technician.

•This range must be electrically grounded in accordance with local codes or, in their absence, with the National Electrical Code ANSI/NFPA No. 70—latest edition in United States or with CSA Standard C22.1, Canadian Electrical Code, Part 1 in Canada.

•The installation of appliances designed for manufactured (mobile) home installation must conform with Manufactured Home Construction and Safety Standard, title 24CFR, part 3280 [Formerly the Federal Standard for Mobile Home Construction and Safety, title 24, HUD (part 280)] or when such standard

is not applicable, the Standard for Manufactured Home Installation 1982 (Manufactured Home Sites, Communities and Setups), ANSI Z225.1/NFPA 501A- latest edition, or with local codes in United States and with CAN/CSA-Z240 MH in Canada.

•Make sure the wall coverings around the range can withstand the heat generated by the range.

•Before installing the range in an area covered with linoleum or any other synthetic floor covering, make sure the floor covering can withstand heat at least 90°F (32.2°C) above room temperature without shrinking, warping or discoloring. Do not install the range over carpeting unless you place an insulating pad or sheet of ¼" (0.64 cm) thick plywood between the range and carpeting.

Never leave children alone or unattended in the area where an appliance is in use. As children grow, teach them the proper, safe use of all appliances. Never leave the oven door open when the range is unattended.

Stepping, leaning or sitting on the door or drawer of this range can result in serious injuries and can also cause damage to the range.

•Do not store items of interest to children in the cabinets above the range. Children could be seriously burned climbing on the range to reach items.

•To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space above the surface unit should be avoided. If cabinet storage is to be provided the risk can

be reduce by installing a range hood that project horizontally a minimum of 5 inches beyond the bottom of the cabinet.

•Do not use the oven as a storage space. This creates a potentially hazardous situation.

•Never use your range for warming or heating the room. Prolonged use of the range without adequate ventilation can be dangerous.

•Do not store or use gasoline or other flammable vapors and liquids near this or any other appliance. Explosions or fires could result.

•Reset all controls to the "off" position after using a programmable timing operation.

FOR MODELS WITH SELF-CLEAN FEATURE:

•Remove oven racks, broiler pan, food and other utensils before self-cleaning the oven. Wipe up excess spillage. Follow the precleaning instructions in the Owner's Guide.

•All ranges can tip.

•Injury to persons could result.

•Install anti- tip device packed with range.

To reduce the risk of tipping of the range, the range must be secured by properly installed anti-tip bracket(s) provided with the range. To check if the bracket(s), is installed properly, grasp the top rear edge of the range and carefully tilt it forward to make sure the range is anchored.

Serial Plate Location

You will find the model and serial number printed on the serial plate. The serial plate is located as shown.

Remember to record the serial number for future reference.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents These surfaces should be flat Leveled hatched areaImportant Cabinet and countertop By the leveling legs and not by the cooktop itselfWidth should match the cutout width Raised ShaveEdge To Clear Space for a 31½ 81 cm Wide Cooktop Important Notes to the Installer Install anti- tip device packed with rangeImportant Note to the Consumer Serial Plate LocationFactory Connected Power Supply Cord Canada only Power Supply Cord Kit U.S.AAccess to Terminal Block & Grounding Strap U.S.A Electrical Shock HazardThree Conductor Wire Connection to Range Four Conductor Wire Connection to RangeWires Cable from ResidenceBlack BoxCabinet Construction Range InstallationCountertop Preparation When All Hookups are Complete Before You Call for ServiceLeveling the Range Check OperationAnti-Tip Brackets Installation Instructions Important Safety WarningTools Required Approx 7/8 Canadá55.25 cm Puerta abiertaVea la nota Panel lateralDemetal Reborde delvidrio Lime el ½ Max BordeNúmero Nota importante para el consumidor Notas importantes para el instaladorEncontrará el modelo y el Peligro de choque eléctrico Estuche de cable del suministro eléctrico U.S.AEléctricos Conexión del cable a tres alambres la cocina Conexión eléctrica a la cocina Estados UnidosConexión del cable de cuatro conductores a la cocina Desconecte el suministro eléctrico Alambres vea figuraAlambre neutral blanco juntos Conecte los dos alambres negros juntosInstalación sin paneles laterales Preparación del mostradorInstalación con un protector trasero Comprobación del Funcionamiento Después de Terminar la InstalaciónUbicación del Número de Modelo y de Serie Antes de Llamar al ServicioInstrucciones de Instalación del Soporte Antivuelco SeguridadHerramientas Necesarias Pour Votre Sécurité N’entreposez pas ou n’utilisez pas Niveau région hachuréeTout autre appareil électroménager Panneau latéral 22 7/8 58,1 cm min 23 1/4 59,05 cm max See note 86 cmArasez le Dessus duComptoir à Au moinsEmplacement de la plaque signalétique ’oubliez pas de laisser ces instructions au consommateurAccès au bloc de connexions et à la plaque de mise à terre Ensemble de cordon dalimentation États-UnisRisque de choc électrique Cuisinière U.S.A Rouge à la borne de droite, et le fil noir à la borne deGauche Abaissez le couvercle des bornes du bloc deDébranchez lalimentation Reliez ensemble, le fil blanc, le fil vert dénudéDe lappareil et le fil neutre blanc du câble DalimentationInstallation de la cuisinière Préparation du dessus de comptoirEmplacement des numéros de modèle et de série Avant d’appeler le service d’entretienMise à niveau de la cuisinière Vérification du FonctionnementInstructions d’installation des supports anti‑bascule ImportantesOutils Requis Tourne‑écrou de 5 /160,79 cm ou tournevis à tête carréeInstructions Dinstallation Pour LA Cuisinière 30 Encastrable Instructions Dinstallation Pour LA Cuisinière 30 Encastrable

318201616 specifications

The Frigidaire 318201616 is a highly regarded appliance component primarily known for its role as an oven control board. Designed to offer reliability and efficient performance, this part is a vital component for various models of Frigidaire ovens, ensuring consistent cooking results and enhancing the overall kitchen experience.

One of the key features of the Frigidaire 318201616 is its user-friendly interface. The control board is equipped with clear indicators that allow users to easily navigate through different cooking modes and settings. This simplifies the cooking process, making it accessible even for individuals who may not be familiar with complex oven functions.

The technology integrated into the Frigidaire 318201616 includes advanced electronic circuitry, which provides precise temperature control. This ensures that dishes are cooked evenly and at the desired temperature, reducing the chances of undercooking or overcooking. The unit also includes built-in safety features to prevent overheating, which is essential for maintaining kitchen safety.

Another important characteristic of this control board is its compatibility with various Frigidaire oven models. This versatility is advantageous for users who may need to replace their oven control board, as it allows for easy installation and a reliable fit. The part is constructed with quality materials that enhance its durability, ensuring longevity even with regular use.

The installation of the Frigidaire 318201616 is straightforward and often requires only basic tools, making it a feasible DIY project for many homeowners. Therefore, it provides a cost-effective solution for those who may want to avoid the expenses associated with professional repairs.

In summary, the Frigidaire 318201616 control board is an essential component that enhances the functionality of Frigidaire ovens. With its user-friendly interface, advanced temperature control technology, broad compatibility, and durable construction, it stands out as a reliable choice for anyone looking to maintain or improve their kitchen appliances. Whether you are an avid home cook or someone who occasionally uses the oven, this control board ensures that your cooking experience is smooth and efficient.
Top Page Image Contents