ge.com
Range Lockout
Safety
Your control will allow you to lock out
the surface units, oven burners and control panel so they cannot be activated.
To lock/unlock the controls:
Turn all surface units off.
Touch the RANGE LOCKOUT pad and then the START pad.
To unlock the control, touch the RANGE LOCKOUT pad and then the START pad.
When this feature is on and the touch pads are touched, the control will beep and the display will show LOC.
■The control
■The adjustment will be retained in memory after a power failure.
Instructions
12 Hour, 24 Hour or Clock Black-Out
Your control is set to use a 12 hour clock.
If you would prefer to have a 24 hour military time clock or
Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Touch the CLOCK pad once. The display will show 12 hr. If this is the choice you want, touch the START pad.
Touch the CLOCK pad again to change
to the 24 hour military time clock. The display will show 24 hr. If this is the choice you want, touch the START pad.
Touch the CLOCK pad again to
the START pad.
NOTE: If the clock is in the
Care and Cleaning |
|
Cook and Hold
Your new control has a cook and hold feature that keeps cooked foods warm for up to 3 hours after the cooking function is finished.
This feature can only be used when timed cooking.
To activate this feature, follow the steps below.
Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Touch the COOKING TIME pad. The display will show Hld OFF.
Touch the COOKING TIME pad again to activate the feature. The display will show Hld ON.
Touch the START pad to activate the cook and hold feature and leave the control set in this special features mode.
Instructions | Installation |
|
|
Tips | Troubleshooting |
|
|
27
Consumer Support