|
| ge.com |
| Oven Racks and Drawer Racks |
|
|
| |
| Clean the racks with an abrasive cleanser. | To make the racks slide more easily, apply |
| The oven racks may be cleaned in the | a small amount of vegetable oil or cooking |
| ||
| oil to a paper towel and wipe the edges | |
| ||
| of the oven racks with the paper towel. | |
| will darken in color, lose their luster and | |
|
| |
| become hard to slide if cleaned during |
|
| the |
|
Safety Instructions |
|
Wire cover holder.
Oven Light Replacement
CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel. Be sure to let the light cover and bulb cool completely.
The oven light bulb is covered with a removable glass cover that is held in place with a
To remove:
Hold a hand under the cover so it doesn’t fall when released. With fingers of the same hand, firmly push back the wire cover holder. Lift off the cover.
Do not remove any screws to remove the cover.
Do not touch hot bulb with a wet cloth. Replace bulb with a
To replace cover:
Place it into the groove of the light receptacle. Pull the wire forward to the center of the cover until it snaps into place. When in place, the wire holds the cover firmly. Be certain the wire is in the depression in the center of the cover.
Connect electrical power to the range.
Instructions | Operating |
| |
Care and Cleaning | |
|
|
Instructions | Installation |
|
|
Tips | Troubleshooting |
|
|
37
Consumer Support