Rotel RC-971 owner manual Risk of Electric Shock Do not Open

Page 2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR THE USAGE

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT. INSERT FULLY.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND.

This symbol is to alert the user to the presence of uninsulated dangerous voltages inside the product's enclosure that may constitute a risk of electric shock.

This symbol is to alert the user to important operating and maintenance (service) instructions in this manual and literature accompanying the product.

WARNING:

There are no user serviceable parts inside. Refer all servicing to qualified service personnel.

WARNING:

To reduce the risk of fire or electrical shock, do not expose the unit to moisture or water. Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take the unit to a qualified service person for in- spection and necessary repairs.

Read all the instructions before connecting or operating the unit. Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the product itself. Follow all operating instructions.

Clean the unit only with a dry cloth or a vacuum cleaner.

Keep the ventilation inlets on the unit unobstructed. For example, do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation slots. If the unit is placed in a bookcase or cabinet, there must be sufficient clearance around the unit and ventilation of the cabinet to allow proper cooling.

Keep the unit away from radiators, heat registers, stoves, or any other appliance that produces heat.

The unit must be connected to a power supply only of the type and voltage specified on the rear panel of the unit.

Connect the unit to the power outlet only with the supplied 2-pin polarized power supply cable or an exact equivalent. Do not modify the supplied cable in any way. Do not attempt to defeat grounding and/or polarization provisions. The cable should be connected to a 2-pin polarized wall outlet, matching the wide blade of the plug to the wide slot of the receptacle. Do not use extension cords.

Do not route the power cord where it will be crushed, pinched, bent at severe angles, exposed to heat, or damaged in any way. Pay particular attention to the power cord at the plug and where it exits the back of the unit.

The power cord should be unplugged from the wall outlet if the unit is to be left unused for a long period of time.

Immediately stop using the unit and have it inspected and/or serviced by a qualified service agency if:

•The power supply cord or plug has been damaged.

•Objects have fallen, or liquid has been spilled, into the unit.

•The unit has been exposed to rain.

•The unit shows signs of improper operation

•The unit has been dropped or damaged in any way

Place the unit on a fixed, level surface strong enough to support its weight. Do not place the unit on a moveable cart that could tip over.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents RC-971 Risk of Electric Shock Do not Open De bedieningsorganen en de ingangen voor de bronnen CD Player Getting Started EnglishAbout Rotel AC Power and Control Output Connections Input Signal ConnectionsRecorder Connections Front Panel ControlsTroubleshooting Français SommaireQuelques précautions Au sujet de RotelDémarrage PositionnementBranchements des sources en entrée Alimentation électrique et mise en serviceBranchement d’un magnétophone Branchements en sortieFace avantÊ Les commandes principales Problèmes de fonctionnementDeutsch InhaltsverzeichnisEinige Vorsichtsmaßnahmen Die Firma RotelZu dieser Anleitung Aufstellung des GerätesTape-Anschlüsse Netzspannung und BedienungEingangsanschlüsse AusgangsanschlüsseBedienelemente an der Gerätefront Bei StörungenItaliano IndiceCollegamento alla rete e controlli Alcune parole sulla RotelPer cominciare Collegamenti in uscita Collegamenti di segnale in ingressoCollegamenti del registratore Interruttore di accensione 2 e spia di accensioneComandi del pannello anteriore Ricerca dei guastiEspañol ContenidoAlgunas Precauciones Acerca de RotelPara Empezar ColocaciónEntrada de Corriente Eléctrica Conexión a la Red Eléctrica y ControlConexiones de la Señal de Entrada Conmutador 2 e Indicador Luminoso 1 de Puesta en MarchaControles de Agudos y Graves Control de VolumenConexiones de Salida Selector de la Fuente que se está Escuchando ListeningProblemas y Posibles Soluciones Wij van Rotel Aan de slag met de RC-971 Wat te doen bij problemen ?Inhoud Het aansluiten op het lichtnetAan de slag met de RC-971 NederlandsWij van Rotel De verbindingen leggen met een opname/weergave apparaat Het aansluiten op het lichtnetHet aansluiten van de ingangen Het aansluiten van de uitgangenWat te doen bij problemen? Caratteristiche SpecificationsSpécifications Características TécnicasPage RC-971

RC-971 specifications

The Rotel RC-971 is a high-performance stereo preamplifier that embodies the brand's commitment to quality audio reproduction. Introduced as a part of Rotel’s comprehensive lineup, the RC-971 serves as a critical component in any high-fidelity sound system, providing exceptional sound quality and connectivity options tailored to audiophiles and casual music lovers alike.

One of the standout features of the RC-971 is its meticulous design aimed at minimizing signal degradation. It employs high-quality components, including metal film resistors and polypropylene capacitors, which contribute to its outstanding signal-to-noise ratio. This attention to detail helps to ensure that the audio output remains pure, delivering rich, detailed sound across a wide frequency range.

The RC-971 is equipped with a versatile selection of inputs and outputs, allowing users to connect multiple audio sources effortlessly. It includes several line-level inputs, a phono input for vinyl enthusiasts, and dedicated outputs for both tape and auxiliary devices. Additionally, the preamp offers balanced XLR outputs for professional audio applications, delivering improved noise immunity and can be used to connect to high-end power amplifiers.

Another significant technology integrated into the RC-971 is Rotel’s exclusive RDB (Rotel Digital Bridge) architecture. This technology enhances the preamp’s digital performance, allowing users to enjoy high-resolution audio playback from digital sources. Together with robust analog circuitry, the RC-971 caters to a variety of audio formats, ensuring versatility in playback.

Furthermore, the RC-971 is notable for its precise volume control mechanism, which utilizes a smooth and reliable motorized potentiometer. This allows for accurate adjustments, ensuring that listeners can achieve the perfect sound level without distortion.

The design of the RC-971 is as functional as it is elegant, featuring a clean and modern aesthetic that fits well into any audio setup. Its solid build quality not only contributes to longevity but also reduces physical vibrations that could interfere with audio performance.

In summary, the Rotel RC-971 preamplifier is a high-quality audio component that reflects Rotel’s passion for audio excellence. With its superior build quality, innovative technologies, and flexible connectivity options, the RC-971 stands out as an exceptional choice for anyone serious about sound quality in their home audio system. Whether you’re listening to vinyl records or streaming digital music, the RC-971 is designed to deliver an unparalleled listening experience.
Top Page Image Contents