Olympus P-200 Do not use the printer in the following places, Connect the power cord correctly

Page 26

WARNING

Do not use the printer in the following places.

Unstable or inclined surfaces.

Places exposed to dust and other particles (such as outdoors, particularly on a beach).

Places subject to rain and water drops, or enclosed places where condensation could occur such as inside a plastic bag.

Do not use the printer with a power supply other than that specified.

Incorrect voltage may damage printer parts, possibly resulting in fire or electric

shock.

Connect the power cord correctly.

For example, if the power cord is plugged in loosely, it may cause a fire or electric shock. Push the plug all the way into the outlet.

Make sure that excessive dust and foreign matter do not accumulate on the power cord.

Dust and foreign matter conduct electricity, which can cause fire and electric shock. If excessive dust and foreign matter accumulates on the cord, unplug the cord and clean it.

Immediately unplug the power cord when an electric storm starts outside.

The induced electricity from storms may cause fire, electric shock, or printer malfunction.

Do not hold the power cord plug with wet hands.

Doing so may cause an electric shock. Be sure your hands are dry before handling.

Do not overload the power outlet.

This printer should be plugged into a separate 110-120 V AC, 60 Hz circuit. If the printer is on a circuit with other appliances, an overload may cause fire or electric shock.

7

Image 26

Contents 200 User Registration Table of Contents System Requirements Turn on the printer and the PC. Launch Windows Installing the SoftwareConnect the printer to your PC Insert the floppy disk into the PCs floppy drive Double-click the AddPrinter icon Select Local printer as the printer connection destinationClick End to complete installation Uninstallation File menu, click DeletePrinting Run the application and open the images you want to printSet the number of prints Copies Click PrintClick the name of the queued document you want to cancel To cancel printingWhen the print monitor is displayed Tips for printing Click Properties Split PrintFile menu of the application, click Print Single Adjusting the Image Quality Set the image quality in the Color adjustment sheetTroubleshooting Guide Jammed, etcBefore printing Olympus America INC 200 Owners Record Table of Contents Duplication restrictions PrecautionsIntroduction Safety precautions If the power cord is damaged, unplug itDo not disassemble or modify the printer Do not damage the power cordDo not install the printer in the following places Do not place liquids on the printerDo not overload the power outlet Connect the power cord correctlyDo not hold the power cord plug with wet hands Do not use the printer in the following placesPage Do not pull the cord with a jerk Do not move the printer when the power cord is tautDo not block the vent Carry the printer with both hands Beware of moisture condensationOperate the printer at least once every six months Transport the printer carefullyUnpacking the printer Getting StartedPrinting of images from a PC What you can do with the P-200 Digital color printerMaking a variety of prints High-quality overcoated printsIdentifying the parts Operation Panel Paper Feed CassetteTo supply power from the provided AC adapter Setting up the printerSetup Recharging the battery Battery power operationRemoving the battery Using print packsRemaining battery power indication Loading the ink ribbon cartridge If the cartridge compartment lid does not close Remove the ink ribbon cartridge, and then re-insert itTo load a half-used ink ribbon cartridge Handling the ink ribbon cartridgeTo replace an ink ribbon cartridge Loading print paper Loading print paper in the paper feed CassetteInstalling the paper feed cassette Onto the printer Storage precautionsPrint all-frame print DPOFprint index print PreparationBasic Printing Opening the card cover Inserting the card into the printers slotBasic Printing Never attempt to insert or remove CompactFlash while Digital cameras with a file name display function PrintingTo change the frame number display to file name Display Frame Basic Printing To cancel printing Other Printing Functions Making split printsMaking split prints of the same image Indexprint Frame No. designation AII-frame display All-frame printing Printing DPOF-reserved images Appears on the control panelPrinting the date SmartMedia or CompactFlash card. Date printingBefore you begin Adjusting the sharpness Troubleshooting For Your InformationIf indicators light or blink If print paper is jammed Paper is jammed Remove jammed paper. See belowFor Your Information About the ink ribbon cartridge and print paper Storage after printingSpecifications PrinterFCC notice Protection against such interference in a residentialAccessories as of October Print index Are not indicated in each case in this manual1100 6MJ