Olympus P-200 manual Never attempt to insert or remove CompactFlash while

Page 45

Cautions

If CompactFlash cannot be inserted easily, do not force it in, but remove it, check the CompactFlash insertion orientation and retry insertion from the beginning.

The image recorded in CompactFlash should be printed as it was recorded using an Olympus digital camera. Proper display and printing performances are not guaranteed for images that have been retouched and saved on a PC or that have been recorded with another brand of digital camera.

Never attempt to insert or remove CompactFlash while the

ACCESS/CHARGE indicator on the operation panel is blinking. Doing so could destroy the CompactFlash formatting, making it unusable.

Notes

Always use Type I (with a capacity of no more than 160 MB) or Type II (with a capacity of 340 MB) Compact Flash.

SmartMedia cards always have priority, even when a CompactFlash card has already been inserted first. If you want to use data from the SmartMedia card, press the SmartMedia/ CompactFlash button to select it.

Keep the card cover open while CompactFlash is inserted in the printer.

If an error is displayed (-E-) during insertion, retry insertion from the beginning. To remove CompactFlash, press the EJECT button. If the display

does not go out, refer to "Troubleshooting" on page 40. If the EJECT button is already pressed in the low

position, press it once to return it to the high position then press it again to eject. While the card is being ejected, the error display (-E-) may appear at times.

Even if this happens, remove the card. (The error

display may also appear if the card is not removed

after ejection, but this is not a malfunction.)

26 Basic Printing

Image 45
Contents 200 User Registration Table of Contents System Requirements Installing the Software Connect the printer to your PCTurn on the printer and the PC. Launch Windows Insert the floppy disk into the PCs floppy drive Select Local printer as the printer connection destination Double-click the AddPrinter iconClick End to complete installation File menu, click Delete UninstallationRun the application and open the images you want to print PrintingClick Print Set the number of prints CopiesTo cancel printing When the print monitor is displayedClick the name of the queued document you want to cancel Tips for printing Split Print File menu of the application, click PrintClick Properties Single Set the image quality in the Color adjustment sheet Adjusting the Image QualityJammed, etc Troubleshooting GuideBefore printing Olympus America INC 200 Owners Record Table of Contents Precautions IntroductionDuplication restrictions If the power cord is damaged, unplug it Safety precautionsDo not install the printer in the following places Do not damage the power cordDo not disassemble or modify the printer Do not place liquids on the printerDo not hold the power cord plug with wet hands Connect the power cord correctlyDo not overload the power outlet Do not use the printer in the following placesPage Do not move the printer when the power cord is taut Do not block the ventDo not pull the cord with a jerk Operate the printer at least once every six months Beware of moisture condensationCarry the printer with both hands Transport the printer carefullyGetting Started Unpacking the printerMaking a variety of prints What you can do with the P-200 Digital color printerPrinting of images from a PC High-quality overcoated printsIdentifying the parts Paper Feed Cassette Operation PanelSetting up the printer SetupTo supply power from the provided AC adapter Battery power operation Recharging the batteryUsing print packs Remaining battery power indicationRemoving the battery Loading the ink ribbon cartridge Remove the ink ribbon cartridge, and then re-insert it If the cartridge compartment lid does not closeHandling the ink ribbon cartridge To replace an ink ribbon cartridgeTo load a half-used ink ribbon cartridge Loading print paper in the paper feed Cassette Loading print paperStorage precautions Installing the paper feed cassette Onto the printerPreparation Basic PrintingPrint all-frame print DPOFprint index print Inserting the card into the printers slot Opening the card coverBasic Printing Never attempt to insert or remove CompactFlash while Printing To change the frame number display to file name DisplayDigital cameras with a file name display function Frame Basic Printing To cancel printing Making split prints Making split prints of the same imageOther Printing Functions Indexprint Frame No. designation AII-frame display All-frame printing Appears on the control panel Printing DPOF-reserved imagesSmartMedia or CompactFlash card. Date printing Printing the dateBefore you begin Adjusting the sharpness For Your Information TroubleshootingIf indicators light or blink Paper is jammed Remove jammed paper. See below If print paper is jammedFor Your Information Storage after printing About the ink ribbon cartridge and print paperPrinter SpecificationsProtection against such interference in a residential FCC noticeAccessories as of October Are not indicated in each case in this manual Print index1100 6MJ