Olympus P-200 manual Specifications, Printer

Page 64

Specifications

Printer

Printing system

Sublimation dye transfer printing

4-pass printing (Yellow/Magenta/ Cyan and protective overcoat layer)

Resolution

320dpi

Effective pixels

1280 (H) x 960 (V) dots (maximum)

Print paper size

4.9 x 3.1 inches (125.6 x 80 mm)

Printing size

4(H) x 3 (V) inches (maximum) (101.6 (H) x 76.2 (V) mm)

Gradations

128levels (7 bits) per color Approx. 2,097,000 colors

Card operation time

Approx. 7 seconds for 2,000,000- pixel class

Approx. 11 seconds for 3,000,000- pixel class

Under Olympus test conditions

Printing time

Approx. 90 seconds per sheet

(excluding card operation time and data transmission time)

Usable card

SmartMedia

3 V (3.3 V), exclusive, 64 MB or less CompactFlash

Type I (160 MB or less) Type II (340 MB or less)

Input/output connectors

Parallel interface (Centronics, 26-pin

x1, compact adapter)

Ink ribbon cartridge

Y+M+C 3 layers and light-resistant overcoat (protective layer) (Capacity: 25 sheets)

Compatible image file format

DCF-compatible, JFIF/EXIF- compliant [JPEG (baseline)/TIFF (RGB)]

DPOF-compatible (print copies, timming and date)

Power requirements

7.6V DC

Dedicated AC adapter

Dedicated battery charger (optional)

Powerconsumption

30 W (during printing)

12 W (during standby)

Operating temperature

41-95°F (5-35°C)

Operating humidity

20-80%

Dimensions

Without automatic feeder: Approx. 4.8 x 2 x 6 inches (W/H/D, excluding protruding parts)

(121 x 52 x 153 mm)

Mass

Approx. 1.8 lb (830 g, excluding

automatic feeder and battery pack)

Automatic feeder

Maximum storage quantity

25sheets

Print paper

See page 17.

Dimensions

Approx. 3.5 x 0.35 x 5.3 inches (W/H/D, excluding protruding parts)

(90 x 9 x 134 mm)

Mass

Approx. 2.3 oz (65 g)

Design and specifications are subject to change without notice.

For Your Information 45

Image 64

Contents 200 User Registration Table of Contents System Requirements Connect the printer to your PC Installing the SoftwareTurn on the printer and the PC. Launch Windows Insert the floppy disk into the PCs floppy drive Double-click the AddPrinter icon Select Local printer as the printer connection destinationClick End to complete installation Uninstallation File menu, click DeletePrinting Run the application and open the images you want to printSet the number of prints Copies Click PrintWhen the print monitor is displayed To cancel printingClick the name of the queued document you want to cancel Tips for printing File menu of the application, click Print Split PrintClick Properties Single Adjusting the Image Quality Set the image quality in the Color adjustment sheetTroubleshooting Guide Jammed, etcBefore printing Olympus America INC 200 Owners Record Table of Contents Introduction PrecautionsDuplication restrictions Safety precautions If the power cord is damaged, unplug itDo not damage the power cord Do not install the printer in the following placesDo not disassemble or modify the printer Do not place liquids on the printerConnect the power cord correctly Do not hold the power cord plug with wet handsDo not overload the power outlet Do not use the printer in the following placesPage Do not block the vent Do not move the printer when the power cord is tautDo not pull the cord with a jerk Beware of moisture condensation Operate the printer at least once every six monthsCarry the printer with both hands Transport the printer carefullyUnpacking the printer Getting StartedWhat you can do with the P-200 Digital color printer Making a variety of printsPrinting of images from a PC High-quality overcoated printsIdentifying the parts Operation Panel Paper Feed CassetteSetup Setting up the printerTo supply power from the provided AC adapter Recharging the battery Battery power operationRemaining battery power indication Using print packsRemoving the battery Loading the ink ribbon cartridge If the cartridge compartment lid does not close Remove the ink ribbon cartridge, and then re-insert itTo replace an ink ribbon cartridge Handling the ink ribbon cartridgeTo load a half-used ink ribbon cartridge Loading print paper Loading print paper in the paper feed CassetteInstalling the paper feed cassette Onto the printer Storage precautionsBasic Printing PreparationPrint all-frame print DPOFprint index print Opening the card cover Inserting the card into the printers slotBasic Printing Never attempt to insert or remove CompactFlash while To change the frame number display to file name Display PrintingDigital cameras with a file name display function Frame Basic Printing To cancel printing Making split prints of the same image Making split printsOther Printing Functions Indexprint Frame No. designation AII-frame display All-frame printing Printing DPOF-reserved images Appears on the control panelPrinting the date SmartMedia or CompactFlash card. Date printingBefore you begin Adjusting the sharpness Troubleshooting For Your InformationIf indicators light or blink If print paper is jammed Paper is jammed Remove jammed paper. See belowFor Your Information About the ink ribbon cartridge and print paper Storage after printingSpecifications PrinterFCC notice Protection against such interference in a residentialAccessories as of October Print index Are not indicated in each case in this manual1100 6MJ