Olympus P-200 manual Double-click the AddPrinter icon

Page 7

Manual installation

1

2

Click the [Start] button ofWindows, point [Setup] and click [Printer].

Double-click the [AddPrinter] icon.

The [Add Printer Wizard] dialog box appears.

3 Select [Local printer] as the printer connection destination.

Olympus does not guarantee that this printer will operate correctly on a

network. The printer should be connected directly to the PC.

8

Image 7

Contents 200 User Registration Table of Contents System Requirements Connect the printer to your PC Installing the SoftwareTurn on the printer and the PC. Launch Windows Insert the floppy disk into the PCs floppy drive Select Local printer as the printer connection destination Double-click the AddPrinter iconClick End to complete installation File menu, click Delete UninstallationRun the application and open the images you want to print PrintingClick Print Set the number of prints CopiesWhen the print monitor is displayed To cancel printingClick the name of the queued document you want to cancel Tips for printing File menu of the application, click Print Split PrintClick Properties Single Set the image quality in the Color adjustment sheet Adjusting the Image QualityJammed, etc Troubleshooting GuideBefore printing Olympus America INC 200 Owners Record Table of Contents Introduction PrecautionsDuplication restrictions If the power cord is damaged, unplug it Safety precautionsDo not place liquids on the printer Do not damage the power cordDo not install the printer in the following places Do not disassemble or modify the printerDo not use the printer in the following places Connect the power cord correctlyDo not hold the power cord plug with wet hands Do not overload the power outletPage Do not block the vent Do not move the printer when the power cord is tautDo not pull the cord with a jerk Transport the printer carefully Beware of moisture condensationOperate the printer at least once every six months Carry the printer with both handsGetting Started Unpacking the printerHigh-quality overcoated prints What you can do with the P-200 Digital color printerMaking a variety of prints Printing of images from a PCIdentifying the parts Paper Feed Cassette Operation PanelSetup Setting up the printerTo supply power from the provided AC adapter Battery power operation Recharging the batteryRemaining battery power indication Using print packsRemoving the battery Loading the ink ribbon cartridge Remove the ink ribbon cartridge, and then re-insert it If the cartridge compartment lid does not closeTo replace an ink ribbon cartridge Handling the ink ribbon cartridgeTo load a half-used ink ribbon cartridge Loading print paper in the paper feed Cassette Loading print paperStorage precautions Installing the paper feed cassette Onto the printerBasic Printing PreparationPrint all-frame print DPOFprint index print Inserting the card into the printers slot Opening the card coverBasic Printing Never attempt to insert or remove CompactFlash while To change the frame number display to file name Display PrintingDigital cameras with a file name display function Frame Basic Printing To cancel printing Making split prints of the same image Making split printsOther Printing Functions Indexprint Frame No. designation AII-frame display All-frame printing Appears on the control panel Printing DPOF-reserved imagesSmartMedia or CompactFlash card. Date printing Printing the dateBefore you begin Adjusting the sharpness For Your Information TroubleshootingIf indicators light or blink Paper is jammed Remove jammed paper. See below If print paper is jammedFor Your Information Storage after printing About the ink ribbon cartridge and print paperPrinter SpecificationsProtection against such interference in a residential FCC noticeAccessories as of October Are not indicated in each case in this manual Print index1100 6MJ