Note
•If your digital camera does not assign file names using 7 digits, use the frame number display function (with the FRAME indicator lit). The corresponding frame numbers can be checked by performing index printing (see page 33).
Use the following procedure to change the display to show the higher 3 digits of the file name (the higher 3 digits of the file name are the one that is displayed on the LCD screen of the digital camera).
Press the (+) and
•The FILE NAME indicator blinks and the higher 4 digits are displayed.
Press the (+) or
•When no button is pressed for 3 seconds or more, the lower 4 digits for the newly selected higher 3 digits will be displayed.
•To display the higher 3 digits again, restart the procedure from step 
again.
2 Press the NUMBER button to switch the button function to the number of print copies selection function.
Select the desired number of print copies with the (+) or
The default print copies setting is 1. The above operation is required only when you want to print more than one copy of the same image.
<FRAME>
|
| <Number of print copies |
Caution | <COPIES> | with upper limit at 25> |
•When the button function is switched to the frame number display function after selecting more than one print copy, the COPIES indicator on the control panel blinks to indicate that the number of print copies selected is more than one.