Olympus P-200 manual Printing, To change the frame number display to file name Display

Page 46

Printing

1 Press the (+) or (-) button to select the frame number of the image to be printed.

To change the frame number display to file name

display:

The frame number display on the control panel can be switched to file name display. Press and hold the DATE and NUMBER buttons simultaneously for about 2 seconds. The FRAME indicator turns off, the FILE NAME indicator lights, and the lowest 3 digits of the file number are displayed below the indicator. Pressing and holding the two keys simultaneously again lights the FRAME indicator and activates the frame number display function.

 

<File name display (file name

<Frame No. display>

assigned in recording by camera)>

Press and hold the (+) or (-) button to increase or decrease the displayed frame Nos. at a higher speed. The frame number display range is between 001 and 1999.

Even when the file name display function is selected, images can be selected in the same way as with the frame number display function.

Digital cameras with a file name display function

usually use 7 digits. The printer's file name display function (with the FILE NAME indicator lit) displays only the lowest 3 digits in the file

name.

The (+) and (-) buttons can vary only the lower 3 digits being displayed.

Basic Printing 27

Image 46
Contents 200 User Registration Table of Contents System Requirements Connect the printer to your PC Installing the SoftwareTurn on the printer and the PC. Launch Windows Insert the floppy disk into the PCs floppy drive Double-click the AddPrinter icon Select Local printer as the printer connection destinationClick End to complete installation Uninstallation File menu, click DeletePrinting Run the application and open the images you want to printSet the number of prints Copies Click PrintWhen the print monitor is displayed To cancel printingClick the name of the queued document you want to cancel Tips for printing File menu of the application, click Print Split PrintClick Properties Single Adjusting the Image Quality Set the image quality in the Color adjustment sheetTroubleshooting Guide Jammed, etcBefore printing Olympus America INC 200 Owners Record Table of Contents Introduction PrecautionsDuplication restrictions Safety precautions If the power cord is damaged, unplug itDo not disassemble or modify the printer Do not damage the power cordDo not install the printer in the following places Do not place liquids on the printerDo not overload the power outlet Connect the power cord correctlyDo not hold the power cord plug with wet hands Do not use the printer in the following placesPage Do not block the vent Do not move the printer when the power cord is tautDo not pull the cord with a jerk Carry the printer with both hands Beware of moisture condensationOperate the printer at least once every six months Transport the printer carefullyUnpacking the printer Getting StartedPrinting of images from a PC What you can do with the P-200 Digital color printerMaking a variety of prints High-quality overcoated printsIdentifying the parts Operation Panel Paper Feed CassetteSetup Setting up the printerTo supply power from the provided AC adapter Recharging the battery Battery power operationRemaining battery power indication Using print packsRemoving the battery Loading the ink ribbon cartridge If the cartridge compartment lid does not close Remove the ink ribbon cartridge, and then re-insert itTo replace an ink ribbon cartridge Handling the ink ribbon cartridgeTo load a half-used ink ribbon cartridge Loading print paper Loading print paper in the paper feed CassetteInstalling the paper feed cassette Onto the printer Storage precautionsBasic Printing PreparationPrint all-frame print DPOFprint index print Opening the card cover Inserting the card into the printers slotBasic Printing Never attempt to insert or remove CompactFlash while To change the frame number display to file name Display PrintingDigital cameras with a file name display function Frame Basic Printing To cancel printing Making split prints of the same image Making split printsOther Printing Functions Indexprint Frame No. designation AII-frame display All-frame printing Printing DPOF-reserved images Appears on the control panelPrinting the date SmartMedia or CompactFlash card. Date printingBefore you begin Adjusting the sharpness Troubleshooting For Your InformationIf indicators light or blink If print paper is jammed Paper is jammed Remove jammed paper. See belowFor Your Information About the ink ribbon cartridge and print paper Storage after printingSpecifications PrinterFCC notice Protection against such interference in a residentialAccessories as of October Print index Are not indicated in each case in this manual1100 6MJ