Olympus P-200 manual Using print packs, Remaining battery power indication, Removing the battery

Page 36

4. Remaining battery power indication

The remaining battery power is indicated for 12 seconds after the printer is turned ON and during printing.

The remaining battery power indicator segments light

according to the following.

lights (turns off automatically): The battery is fully charged. You can print.

lights (turnsoffautomatically): The remaining battery power is sufficient. You can print.

lights (turns off automatically): The remaining battery power is too low. A few pages may be printed but battery power may run out before printing is complete.

lights: No remaining battery power. Turn the printer OFF and recharge the battery.

5. Removing the battery

Turn the printer OFF and make sure that the AC adapter is not connected.

Slide the battery unlock lever toward the paper feed cassette position (by about 2 mm), then remove the battery by sliding it in the opposite direction from when it was installed.

Install the rear cover in the same way as installing the battery. Store the removed battery with the provided cover installed to it.

Using print packs

Notes

Always use the ink ribbon cartridge and print paper supplied together in the same carton.

Do not print on used print paper.

You need the provided sample kit or an optional print pack (set of ink ribbon cartridge and print paper) for printing.

Purpose

Print Pack

Print Paper

Ink Ribbon

(Printing)

 

 

Cartridge

Standard

P-25N

Standard

For25prints

Setup 17

Image 36
Contents 200 User Registration Table of Contents System Requirements Installing the Software Connect the printer to your PCTurn on the printer and the PC. Launch Windows Insert the floppy disk into the PCs floppy drive Double-click the AddPrinter icon Select Local printer as the printer connection destinationClick End to complete installation Uninstallation File menu, click DeletePrinting Run the application and open the images you want to printSet the number of prints Copies Click PrintTo cancel printing When the print monitor is displayedClick the name of the queued document you want to cancel Tips for printing Split Print File menu of the application, click PrintClick Properties Single Adjusting the Image Quality Set the image quality in the Color adjustment sheetTroubleshooting Guide Jammed, etcBefore printing Olympus America INC 200 Owners Record Table of Contents Precautions IntroductionDuplication restrictions Safety precautions If the power cord is damaged, unplug itDo not damage the power cord Do not install the printer in the following placesDo not disassemble or modify the printer Do not place liquids on the printerConnect the power cord correctly Do not hold the power cord plug with wet handsDo not overload the power outlet Do not use the printer in the following placesPage Do not move the printer when the power cord is taut Do not block the ventDo not pull the cord with a jerk Beware of moisture condensation Operate the printer at least once every six monthsCarry the printer with both hands Transport the printer carefullyUnpacking the printer Getting StartedWhat you can do with the P-200 Digital color printer Making a variety of printsPrinting of images from a PC High-quality overcoated printsIdentifying the parts Operation Panel Paper Feed CassetteSetting up the printer SetupTo supply power from the provided AC adapter Recharging the battery Battery power operationUsing print packs Remaining battery power indicationRemoving the battery Loading the ink ribbon cartridge If the cartridge compartment lid does not close Remove the ink ribbon cartridge, and then re-insert itHandling the ink ribbon cartridge To replace an ink ribbon cartridgeTo load a half-used ink ribbon cartridge Loading print paper Loading print paper in the paper feed CassetteInstalling the paper feed cassette Onto the printer Storage precautionsPreparation Basic PrintingPrint all-frame print DPOFprint index print Opening the card cover Inserting the card into the printers slotBasic Printing Never attempt to insert or remove CompactFlash while Printing To change the frame number display to file name DisplayDigital cameras with a file name display function Frame Basic Printing To cancel printing Making split prints Making split prints of the same imageOther Printing Functions Indexprint Frame No. designation AII-frame display All-frame printing Printing DPOF-reserved images Appears on the control panelPrinting the date SmartMedia or CompactFlash card. Date printingBefore you begin Adjusting the sharpness Troubleshooting For Your InformationIf indicators light or blink If print paper is jammed Paper is jammed Remove jammed paper. See belowFor Your Information About the ink ribbon cartridge and print paper Storage after printingSpecifications PrinterFCC notice Protection against such interference in a residentialAccessories as of October Print index Are not indicated in each case in this manual1100 6MJ