4 Insert the floppy disk into the PC's floppy drive and select [Use disk].
Set the floppy disk drive as the [Copy source of distributed file.]
The drive name of the floppy disk drive varies depending on the setup of
each PC. Check your PC's instruction manual if you are not sure.
| When you find the file, go on to the next step. |
5 | Set [LPT1: Printer port] as the port to be used by the printer. |
6 | Select whether the printer is used as the default printer or not. |
7 Click [End] to complete installation.
Note
When "Insert Windows
continue.
9