Olympus P-200 manual Setting up the printer, Setup, To supply power from the provided AC adapter

Page 34

Setup

Setting up the printer

Connecting the power supply

To supply power from the provided AC adapter

1.Plug the printer power cord into the AC adapter.

2.Plug the AC adapter power cord into a wall outlet, then plug the other end of the printer power cord into the printer's DC power input connector.

3.Press and hold the POWER button for more than 1.5 seconds.

4.The printer turns ON with a beep tone, and the control panel is displayed.

5.To turn the printer OFF, press and hold the POWER button for more than 1.5 seconds. The control panel will turn off and the printer turns OFF with a short beep.

If you want to use the AC adapter as the power supply to the printer, remove the rechargeable battery if possible. This will help prevent deteriora- tion of the rechargeable battery.

If the printer power cord is accidentally unplugged from the printer during printing, turn the printer OFF, plug the printer power cord into the printer's DC power input connector, and then turn the printer ON again. Leaving the printer unplugged in printing mode may cause it to malfunction.

Setup 15

Image 34

Contents 200 User Registration Table of Contents System Requirements Connect the printer to your PC Installing the SoftwareTurn on the printer and the PC. Launch Windows Insert the floppy disk into the PCs floppy drive Double-click the AddPrinter icon Select Local printer as the printer connection destinationClick End to complete installation Uninstallation File menu, click DeletePrinting Run the application and open the images you want to printSet the number of prints Copies Click PrintWhen the print monitor is displayed To cancel printingClick the name of the queued document you want to cancel Tips for printing File menu of the application, click Print Split PrintClick Properties Single Adjusting the Image Quality Set the image quality in the Color adjustment sheetTroubleshooting Guide Jammed, etcBefore printing Olympus America INC 200 Owners Record Table of Contents Introduction PrecautionsDuplication restrictions Safety precautions If the power cord is damaged, unplug itDo not disassemble or modify the printer Do not damage the power cordDo not install the printer in the following places Do not place liquids on the printerDo not overload the power outlet Connect the power cord correctlyDo not hold the power cord plug with wet hands Do not use the printer in the following placesPage Do not block the vent Do not move the printer when the power cord is tautDo not pull the cord with a jerk Carry the printer with both hands Beware of moisture condensationOperate the printer at least once every six months Transport the printer carefullyUnpacking the printer Getting StartedPrinting of images from a PC What you can do with the P-200 Digital color printerMaking a variety of prints High-quality overcoated printsIdentifying the parts Operation Panel Paper Feed CassetteSetup Setting up the printerTo supply power from the provided AC adapter Recharging the battery Battery power operationRemaining battery power indication Using print packsRemoving the battery Loading the ink ribbon cartridge If the cartridge compartment lid does not close Remove the ink ribbon cartridge, and then re-insert itTo replace an ink ribbon cartridge Handling the ink ribbon cartridgeTo load a half-used ink ribbon cartridge Loading print paper Loading print paper in the paper feed CassetteInstalling the paper feed cassette Onto the printer Storage precautionsBasic Printing PreparationPrint all-frame print DPOFprint index print Opening the card cover Inserting the card into the printers slotBasic Printing Never attempt to insert or remove CompactFlash while To change the frame number display to file name Display PrintingDigital cameras with a file name display function Frame Basic Printing To cancel printing Making split prints of the same image Making split printsOther Printing Functions Indexprint Frame No. designation AII-frame display All-frame printing Printing DPOF-reserved images Appears on the control panelPrinting the date SmartMedia or CompactFlash card. Date printingBefore you begin Adjusting the sharpness Troubleshooting For Your InformationIf indicators light or blink If print paper is jammed Paper is jammed Remove jammed paper. See belowFor Your Information About the ink ribbon cartridge and print paper Storage after printingSpecifications PrinterFCC notice Protection against such interference in a residentialAccessories as of October Print index Are not indicated in each case in this manual1100 6MJ