Olympus P-200 manual If indicators light or blink

Page 60

The control panel displays 000 when the card is inserted.

There is no recognizable image data on the card. Check your camera's manual to confirm that its recording format is compatible with the printer (DCF/ EXIF).

The error display (-E-) appears when the card is inserted.

The card is not inserted correctly.

Remove the card and insert it again. There is a problem with the card.

Check the card and its contents. (Pages 24-26)

Noise interferes with printed images.

The data being printed is not data recorded by a digital camera.

Use a PC to print out image data that has not been recorded by a digital camera.

The data being printed has been processed by retouching software, etc.

The printer may be unable to print image data which has not been recorded by a digital camera.

Printing intervals are longer.

Printing intervals are automatically extended during continuous printing to prevent the internal components from overheating. (At this time, the PRINTING indicator blinks.)

This is not a malfunction. Wait a few minutes.

If indicators light or blink

If you cannot print, check the indicators on the opera- tion panel of the printer.

The PAPER/RIBBON alarm indicator blinks slowly (at intervals of about 0.5 sec.).

No ink ribbon cartridge is installed in the printer.

Install an ink ribbon cartridge to the printer. (Page 18) The print ribbon in the ink ribbon cartridge has run out. Replace the ink ribbon cartridge with a new one. (Page

20)

The PAPER/ RIBBON alarm indicator blinks fast (at intervals of about 0.25 sec.).

The paper feed cassette is not installed.

Install the paper feed cassette. (Page 22)

No print paper is loaded in the paper feed cassette. Remove the paper feed cassette, place print paper in it and install it to the printer. (Pages 21-22)

For Your Information 41

Image 60
Contents 200 User Registration Table of Contents System Requirements Installing the Software Connect the printer to your PCTurn on the printer and the PC. Launch Windows Insert the floppy disk into the PCs floppy drive Double-click the AddPrinter icon Select Local printer as the printer connection destinationClick End to complete installation Uninstallation File menu, click DeletePrinting Run the application and open the images you want to printSet the number of prints Copies Click PrintTo cancel printing When the print monitor is displayedClick the name of the queued document you want to cancel Tips for printing Split Print File menu of the application, click PrintClick Properties Single Adjusting the Image Quality Set the image quality in the Color adjustment sheetTroubleshooting Guide Jammed, etcBefore printing Olympus America INC 200 Owners Record Table of Contents Precautions IntroductionDuplication restrictions Safety precautions If the power cord is damaged, unplug itDo not damage the power cord Do not install the printer in the following placesDo not disassemble or modify the printer Do not place liquids on the printerConnect the power cord correctly Do not hold the power cord plug with wet handsDo not overload the power outlet Do not use the printer in the following placesPage Do not move the printer when the power cord is taut Do not block the ventDo not pull the cord with a jerk Beware of moisture condensation Operate the printer at least once every six monthsCarry the printer with both hands Transport the printer carefullyUnpacking the printer Getting StartedWhat you can do with the P-200 Digital color printer Making a variety of printsPrinting of images from a PC High-quality overcoated printsIdentifying the parts Operation Panel Paper Feed CassetteSetting up the printer SetupTo supply power from the provided AC adapter Recharging the battery Battery power operationUsing print packs Remaining battery power indicationRemoving the battery Loading the ink ribbon cartridge If the cartridge compartment lid does not close Remove the ink ribbon cartridge, and then re-insert itHandling the ink ribbon cartridge To replace an ink ribbon cartridgeTo load a half-used ink ribbon cartridge Loading print paper Loading print paper in the paper feed CassetteInstalling the paper feed cassette Onto the printer Storage precautionsPreparation Basic PrintingPrint all-frame print DPOFprint index print Opening the card cover Inserting the card into the printers slotBasic Printing Never attempt to insert or remove CompactFlash while Printing To change the frame number display to file name DisplayDigital cameras with a file name display function Frame Basic Printing To cancel printing Making split prints Making split prints of the same imageOther Printing Functions Indexprint Frame No. designation AII-frame display All-frame printing Printing DPOF-reserved images Appears on the control panelPrinting the date SmartMedia or CompactFlash card. Date printingBefore you begin Adjusting the sharpness Troubleshooting For Your InformationIf indicators light or blink If print paper is jammed Paper is jammed Remove jammed paper. See belowFor Your Information About the ink ribbon cartridge and print paper Storage after printingSpecifications PrinterFCC notice Protection against such interference in a residentialAccessories as of October Print index Are not indicated in each case in this manual1100 6MJ